Trying to get my engine bay dress up going in titanium. Anyone know the bolt sizes i need and how many?

 

Dressupbolts.com

 

Here is another option:
https://zspecdesign.com/zspec-ultima...-q50-vq-based/

 

I got the impression he wanted to not go with a off the self kit. Zspec is not TI, and though Dressupbolts.com are TI, they are over priced. You can piece together a set for about $100 less.

M6x10 x10 at minimum
M6x25 x17 at least
M8x25 x4, but I would go with at least 6, there are 8, but the other 2 a super covered
Your shock nuts are M8

 

Got a good source for pretty Ti bolts? I have everything imaginable at work but none of its pretty

 

AliExpress pretty much gives you access to every manufacture in China which is were 99% of these bolts are coming from. Pick your poison there. I've used them a few times for a couple different parts and hard to find things at a great price. Contacting the manufactures and asking questions typically can get you exactly what you are looking for; you just have to have the time and patience to communicate to reap the pay-out. Seeing as these are not load bearing bolts the argument of "build quality" is pretty much thrown out the window if your one of those types. If you are looking for something more North America then I would recommend AcerRacing, though I m pretty sure they get their's from over seas as well. I don't think there is even a refinery in NA for titanium actually, ATI might, but you can't quote me on that.

 

Here's an engine bay dress-up idea that I've been thinking about for a while. I created a custom panel at the center-back of the engine bay, with a single length of aftermarket trim-seal all the way across.

https://www.myg37.com/forums/g37-sed...ack-panel.html