G37x Engine removal
#1
Registered User
Thread Starter
Join Date: Dec 2012
Location: anchorage
Posts: 6
Likes: 0
Received 0 Likes
on
0 Posts
G37x Engine removal
So, I have recently had some engine troubles. Cylinder 4 and 5 are both at 70 psi. I have read through the service manual and noticed that for the X I have to drop the engine from the bottom. Do you have to do it that way or can I pull it out through the front? Any help is greatly appreciated
#3
Registered User
Thread Starter
Join Date: Dec 2012
Location: anchorage
Posts: 6
Likes: 0
Received 0 Likes
on
0 Posts
The only good picture I can find is the one of a g37x sedan up on a lift. I can't tell if that is done just because it is the only way or the shop has to follow the guidelines made by the manufacturer. The shop that has my car right now gave me the step by step to do it that their system shows. It consists of lifting the vehicle. I have to do more digging. I dont want to spend 3k+ just for labor.
#5
The only good picture I can find is the one of a g37x sedan up on a lift. I can't tell if that is done just because it is the only way or the shop has to follow the guidelines made by the manufacturer. The shop that has my car right now gave me the step by step to do it that their system shows. It consists of lifting the vehicle. I have to do more digging. I dont want to spend 3k+ just for labor.
Last edited by warpeacelove; 10-05-2015 at 10:01 PM.
#7
Thread
Thread Starter
Forum
Replies
Last Post
Nathan Do
Wheels & Tires
2
10-02-2015 09:38 AM
Junchao Sun
Engine, Drivetrain & Forced-Induction
25
10-01-2015 12:41 PM
mikysee
Audio, Video & Electronics
0
09-28-2015 11:18 AM