Well got my first cell on the way home tonight. Took a buddy for ride and ripped on her pretty good, dropped him off and 10 mins later PO106( Absolute Pressure Perfomence) Anyone had this before, I know there has been talk about the Stock MAFs only being able to handle 400 WHP max.

 

MAP sensor

Manifold Absolute Pressure

check your map sensor located behind the intake manifold.

 

Thanks man, I'll check it in the morning.. loose? Its just a plug isn't it?

 

yeah, all you can do is make sure it is plugged in and if you have have the uprev software and cable you can try clearing it and see what happens

 

Thanks man my buddy cleared it alreay but I'll check the plug in the morning..

 

P0106 is for a MAP sensor, NOT a MAF sensor.

Stock MAP (Manifold Absolute Pressure) can only handle 1 BAR, they are made for N/A cars, which have intakes under vacuum.

You should have had a 2 BAR or 3 BAR MAP installed with your SC. As there is NO vacuum during WOT in your intake, only pressure!!


..

 

Does anyone make a upgraded MAP sensor? Never heard of one,

 

Unless Infiniti makes a 2 BAR sensor OEM?? You should call Stillen and ask.

 

did it look something like this?

 

Infiniti G37 AEM Map Sensor Kits

 

Thanx for the link, Cause we ALL KNOW how a feel about Stillen. + Dont think anyone would have known anyway.

 

I wish we had those cool bouncing 3d fuel maps too.

 

Simple fix through the software, have your tuner take care it .

Sam

 

Hey Thanx Sam. Is it just to turn the sensor off?

 

Thanx for all the input guys, My tuner tuned that code off on the ECU, also played a little more with the 0-60 trottle and moved to 91% open,( The max) the ECU will allow. He was telling me how the GTR's and EVO's are similar GTR is like 95% open and the EVO's open about 90-91%. Car felt so much quicker from a dead stop.