My Nitrous Set Up
12-06-2011, 06:44 AM
#31
Registered Member
iTrader: (13)
Ah had a RS4( He was not happy) two weeks ago on the pike at 530am on my way to work,, WOuld be nice but EH, I'm not saying its smart casue it never is but I wound never with traffic, Would need to clear.. I'm not smart I know. LOL Never city roads
12-06-2011, 01:10 PM
#34
Idk, where or who told you that is incorrect.
You may need a valve body upgrade, if you did tt you would have to upgrade your valve body at the least
I have a 5 at my trans has zero issues it never has sliped.
Auto 5 at can handle 550hp before you need upgrades.
7 at internernals not as strong as a 5 at , so any real work your going to have to upgrade.
You may need a valve body upgrade, if you did tt you would have to upgrade your valve body at the least
I have a 5 at my trans has zero issues it never has sliped.
Auto 5 at can handle 550hp before you need upgrades.
7 at internernals not as strong as a 5 at , so any real work your going to have to upgrade.
Last edited by RISKY GUY; 12-06-2011 at 01:16 PM.
12-06-2011, 01:33 PM
#35
Registered Member
iTrader: (13)
Idk, where or who told you that is incorrect.
You may need a valve body upgrade, if you did tt you would have to upgrade your valve body at the least
I have a 5 at my trans has zero issues it never has sliped.
Auto 5 at can handle 550hp before you need upgrades.
7 at internernals not as strong as a 5 at , so any real work your going to have to upgrade.
You may need a valve body upgrade, if you did tt you would have to upgrade your valve body at the least
I have a 5 at my trans has zero issues it never has sliped.
Auto 5 at can handle 550hp before you need upgrades.
7 at internernals not as strong as a 5 at , so any real work your going to have to upgrade.
12-07-2011, 04:08 AM
#38
Anmvq, this is not cheap mod to do it requires a lot of $
Neverbonestock
Nano is the real deal, my only concern is the high psi.
What kit did you get.?
Also are you doing any internal work on motor?
with your set up is going to be a serial rapist .
Neverbonestock
Nano is the real deal, my only concern is the high psi.
What kit did you get.?
Also are you doing any internal work on motor?
with your set up is going to be a serial rapist .
12-07-2011, 06:30 AM
#39
Registered Member
iTrader: (13)
Risky,
I really did not think is was a cheap mod, but over 2k was a shock to me. I know it was a long time ago but I had a 250 shot and a program box( on the dash) on my old Monte SS and the whole thing was less than $2300? I know times change things get "better" but was not expecting that. :/. ..
I really did not think is was a cheap mod, but over 2k was a shock to me. I know it was a long time ago but I had a 250 shot and a program box( on the dash) on my old Monte SS and the whole thing was less than $2300? I know times change things get "better" but was not expecting that. :/. ..
12-07-2011, 11:24 AM
#40
Electronics are overpriced, but a requirement for a ecu that is a pia to work with.
Look at gains from just a tune, minimal to say the least.
Plus a big block is not gonna stress like our motors.
Bigger displacement better for shock of extra power.
Comparing prices for a big block high HP shot vs more tech advanced & much more controlling of what goes on.
hate to think of all the costs, just added another ton to improve my set up.
As you already know there is no cost effective high HP for us.
Either It's twins a s/c or this.
Look at gains from just a tune, minimal to say the least.
Plus a big block is not gonna stress like our motors.
Bigger displacement better for shock of extra power.
Comparing prices for a big block high HP shot vs more tech advanced & much more controlling of what goes on.
hate to think of all the costs, just added another ton to improve my set up.
As you already know there is no cost effective high HP for us.
Either It's twins a s/c or this.
