shifting into 6th gear?
shifting into 6th gear?
don't laugh guys but im scared to shift into 6th gear, i feel like i might accidently shift into reverse and **** my transmission up.
Honestly all i see is 6 gears (including reverse) so im confused. LOL
Honestly all i see is 6 gears (including reverse) so im confused. LOL
IF ITS A 6MT:
Straight down from 5th, reverse needs a push to the right, and down.
Might you have a 5MT??
If you're at a speed where you need to shift up to sixth gear, you won't be able to get it into reverse. Even if you push the shift lever down and allow yourself to move it into that fork, you won't be able to get the teeth to mesh. You don't have syncros in reverse, so you won't wear that out.
Just pull the shift lever straight down from fifth and you'll be fine. You can even push it against the right side to make sure you don't hit fourth by accident. It's a little weird when you get your first 6 speed instead of the old 5 speeds, but you get used to it quick.
Just pull the shift lever straight down from fifth and you'll be fine. You can even push it against the right side to make sure you don't hit fourth by accident. It's a little weird when you get your first 6 speed instead of the old 5 speeds, but you get used to it quick.
Thread
Thread Starter
Forum
Replies
Last Post
blnewt
D.I.Y. Installations/Modifications
37
Oct 17, 2020 11:12 AM
r0cketm0nkey
General Tech Questions
17
Nov 23, 2015 03:34 AM
Jonesmeister11
Engine, Drivetrain & Forced-Induction
4
Sep 27, 2015 08:28 PM




