When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
One major issue is the the rubber elbow adapter is wedged in the core support opening, causing it to distort. The opening on the engine side is over 1/2" too large, thus a clamp will cause it to bunch while tightening.
im just looking for something that I can make fit into my M37....
This is the exact complaint that I have and I think I am going to call the vendor whom I bought it from and see if I can exchange it for the Stillen.
Originally Posted by TVPostSound
Kenny,
One major issue is the the rubber elbow adapter is wedged in the core support opening, causing it to distort. The opening on the engine side is over 1/2" too large, thus a clamp will cause it to bunch while tightening.
Wonder why they didn't use a higher quality rubber coupler or throw in some of those real nice silicone ones. Unfortunate because I would've expected better of Takeda.