Engine, Drivetrain & Forced-Induction
Have Technical Questions or Done Modifications to the G37? Find out the answer in here!

gear ratio: 2009 7A vs 2008 5A vs 6MT acceleration ?? 5at might be better 0-60??

Thread Tools
 
Search this Thread
 
Old Oct 27, 2008 | 02:28 PM
  #31  
karayanev's Avatar
karayanev
Registered User
 
Joined: Sep 2008
Posts: 17
Likes: 0
Boys,
Here are the real acceleration from infiniti site in italy the 2009 g37s...
Do not forget that the Euro Infiniti cars have less power than the US ones.
Reply
Old Oct 27, 2008 | 02:35 PM
  #32  
KAHBOOM's Avatar
KAHBOOM
Super Moderator of Pwnage
iTrader: (4)
 
Joined: Jun 2003
Posts: 2,693
Likes: 195
From: NC
Ya the euro models have less power. And 0-100 KM is like 0-62 correct(?)
Reply
Old Oct 27, 2008 | 04:50 PM
  #33  
trebien's Avatar
trebien
Registered User
 
Joined: Feb 2005
Posts: 69
Likes: 0
From: ATX
Originally Posted by KAHBOOM
Ya the euro models have less power. And 0-100 KM is like 0-62 correct(?)
Unless there is a shift between 60 and 62 mph for either car, it wouldn't really affect the numbers.

Over time and with multiple data points and reviews, I think the 7AT and 6MT will post practically identical acceleration figures. And it's about time... although I would still get the 6MT.

But no matter what, as in the past, the sedan will still be slightly faster than the coupe... similarly equipped.
Reply
Old Feb 10, 2009 | 12:13 PM
  #34  
sbkim's Avatar
sbkim
Registered User
 
Joined: Mar 2008
Posts: 33
Likes: 0
Appears that 7AT has similar gearing to BMW 335 6AT. Could mean lower 0-60 times?



2008 - 5Auto 2009 - 7Auto 6 MT
1st gear 3,84 4,92 3,79
2nd gear 2,35 3,19 2,32
3rd gear 1,52 2,04 1,62
4th gear 1,00 1,41 1,27
5th gear 0,84 1,00 1,00
6th gear - 0,86 0,79
7th gear - 0,77 -
Final drive ratio 3,69 3,36 3,69



Per MT:

OVERALL GEARING COMPARISON
BMW
Gear Ratio Mph/1000 Max speed
I 4.17 5 35
II 2.34 8.9 62
III 1.52 13.7 96
IV 1.14 18.3 128
V 0.87 24 168
VI 0.69 30.2 212
Infiniti % taller than BMW
Gear Ratio Mph/1000 Max speed 8.10%
I 3.84 5.4 41 -0.90%
II 2.35 8.8 66 -1.00%
III 1.53 13.6 102 13.50%
IV 1 20.8 156 3.30%
V 0.84 24.8 186 -18.1% (Infiniti 5th to BMW 6th)

Last edited by sbkim; Feb 10, 2009 at 12:30 PM.
Reply
Old Mar 7, 2009 | 07:11 PM
  #35  
G37USR's Avatar
G37USR
Registered User
 
Joined: Oct 2008
Posts: 27
Likes: 0
From: MI
There is something wrong. The 7a/t has the shortest gearing. And it was proven to have .01-2 faster accel the then 6m/t. The G35 5a/t is like 1sec slower then both.
Reply
Old May 28, 2013 | 04:42 AM
  #36  
G37Sam's Avatar
G37Sam
Administrator
 
Joined: Aug 2008
Posts: 12,173
Likes: 244
From: Doha, Qatar
Google brought me back here and I figured I'd update/correct this thread. I finally pulled my OEM Ring & Pinion out. My fellow 5 speeders, I got some bad news for you:

Name:  OEM_zps68aea7e7.jpg
Views: 2342
Size:  77.9 KB

This was pulled out of my OEM diff. It shows that the Ring has 47 teeth, and the Pinion has 14 teeth. If you do the math, that's a ratio of 3.357:1. Every online resource I came across showed 3.69:1 just like the MT but that is clearly not the case. I double checked with Nissan's technical department here and they have confirmed that it's a 3.357:1 not 3.69:1.
Reply
Old May 28, 2013 | 05:11 AM
  #37  
1G372nv's Avatar
1G372nv
Registered User
iTrader: (7)
 
Joined: Dec 2009
Posts: 446
Likes: 46
Well thats disappointing!
Reply
Old Nov 25, 2017 | 07:48 AM
  #38  
rrellik's Avatar
rrellik
Registered User
 
Joined: Oct 2017
Posts: 2
Likes: 1
Originally Posted by G37Sam
Google brought me back here and I figured I'd update/correct this thread. I finally pulled my OEM Ring & Pinion out. My fellow 5 speeders, I got some bad news for you:

Attachment 154095

This was pulled out of my OEM diff. It shows that the Ring has 47 teeth, and the Pinion has 14 teeth. If you do the math, that's a ratio of 3.357:1. Every online resource I came across showed 3.69:1 just like the MT but that is clearly not the case. I double checked with Nissan's technical department here and they have confirmed that it's a 3.357:1 not 3.69:1.
sam are you sure that all 08 g37s have 3.357 gearing?
Reply
Old Nov 25, 2017 | 10:50 AM
  #39  
Ricio1991's Avatar
Ricio1991
Registered Member
 
Joined: Jul 2014
Posts: 1,301
Likes: 113
From: Tempe,AZ
No way? That’s crazy all 5 speed 08 g37s should have a 3.69 ratio this is really disappointing because I wanted to swap mine
Reply
Old Nov 28, 2017 | 11:24 AM
  #40  
G37Sam's Avatar
G37Sam
Administrator
 
Joined: Aug 2008
Posts: 12,173
Likes: 244
From: Doha, Qatar
Well I can't speak for every G37 built out of tochigi in 2008 but I can confirm that my 5AT came with a 3.357:1 four years later
Reply
Old Nov 30, 2017 | 02:32 PM
  #41  
Kris9884's Avatar
Kris9884
Registered Member
iTrader: (3)
 
Joined: Feb 2016
Posts: 2,073
Likes: 202
From: MO
Spit balling here but would having and LSD rear end make a difference? I cant imagine it would but, just wondering...
Reply
Old Sep 3, 2018 | 04:10 PM
  #42  
ThebigJ's Avatar
ThebigJ
Registered Member
 
Joined: Aug 2015
Posts: 243
Likes: 17
Interesting, so can someone explain what causes the huge difference in rpm between 7at and 5at?

If the FD are the same and 5at has 0.84 ratio in fifth gear and 7at has 0.77 the difference should not be that huge yet on highway I hit somewhere around 2900-3000 at 71 yet I see that 7at people are below 2k ..
Reply
Old Sep 3, 2018 | 06:39 PM
  #43  
slartibartfast's Avatar
slartibartfast
Super Moderator
10 Year Member
Liked
Loved
Community Favorite
iTrader: (7)
 
Joined: Oct 2014
Posts: 6,105
Likes: 842
From: Houston, Tx
7AT runs about 2400 rpm at 70 mph. At least, mine does.
Reply
Old Sep 3, 2018 | 10:43 PM
  #44  
ThebigJ's Avatar
ThebigJ
Registered Member
 
Joined: Aug 2015
Posts: 243
Likes: 17
Originally Posted by slartibartfast
7AT runs about 2400 rpm at 70 mph. At least, mine does.
My mistake then sorry.
Still If the final gear ratios are the same and 3.36 as mentioned in this thread at 70 mine should run around 2600 rpms yet I am around 2900-3000 rpm at 70. Are we certain that the 5at with lsd is coming with 3.36?

Reply
Old Sep 4, 2018 | 09:19 AM
  #45  
Baadnewsburr's Avatar
Baadnewsburr
Super Moderator
iTrader: (3)
 
Joined: Oct 2014
Posts: 1,784
Likes: 320
From: Toronto
Originally Posted by ThebigJ
My mistake then sorry.
Still If the final gear ratios are the same and 3.36 as mentioned in this thread at 70 mine should run around 2600 rpms yet I am around 2900-3000 rpm at 70. Are we certain that the 5at with lsd is coming with 3.36?
I didn't reread what was said earleir inthsi thread but I can tell you from installing two o nan AWD car (which wont work with 3.36 gears b/c the front diff is 3.69 and needs to be matched) and from this chart (https://www.z1motorsports.com/upload...GearRatios.pdf,) the 5at LSDs have 3.69 gears not 3.36
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
jadams
TSB - Technical Bulletins
29
Aug 16, 2023 12:42 PM
JoshB
Newbie Corner
28
Oct 15, 2015 03:08 PM
Snypos
Engine, Drivetrain & Forced-Induction
6
Oct 25, 2014 02:09 PM
JSolo
Buying & Leasing
7
Dec 2, 2011 11:42 PM




All times are GMT -4. The time now is 05:11 AM.