I have been installing my new diode dynamic LED fog lights in my 2012 G37x and am stuck!
I managed to the pry back the plastic wheel well on the driver side and easily plugged in that bulb. On the passenger side, I am not sure how to work around the washer reservoir.
I may need to take it in to get help somewhere.

 

Easiest way might be jacking up the car and going from the bottom thru that plastic part. The splash guard or whatever it's called

 

Great thank you.

 

hopefully you got it, but if not ^^^wowwed is the way i did mine too. took of the bolt- about 4-5 if i recall, bent the plastic back and reached in there. there is only the one top nut if you want to take the whole unit out- on this side with the reservoir, it takes a little bit of reaching(and tearing skin) but doable. once there, just twist and out etc.. good luck- are you upgrading bulb?