Got my new bezel from Circle Infiniti and got the dealership to install it. It took them about 30 min. Looks good as new now. They charged me 1/2 hr labor $57.00 :eek:
But it was worth it for me just to save me some time. |
Is this a revised bezel?
|
This write-up definitely saved me a stack of cash doing it myself. I have to admit, I was scared to death the airbag would go off somehow while I was handling it. The steering wheel looks great now. If only infiniti would release similar trim for the doors and console, that would be nasty.
|
Originally Posted by nassiris90
(Post 3596828)
This write-up definitely saved me a stack of cash doing it myself. I have to admit, I was scared to death the airbag would go off somehow while I was handling it. The steering wheel looks great now. If only infiniti would release similar trim for the doors and console, that would be nasty.
|
Wasn't there a Recall on G37s on this?
|
Infiniti Parts - Infiniti parts
Here is the direct website for owners with black trim and bluetooth buttons. This was a great find, thanks so much!:BOUNCE: |
Some people have been asking about torque specs for the (re)install. I whipped this up from the manual (make sure you read the torque specs correctly: one is in "in-lbs" and the other in "ft-lbs"!)
http://s11.postimg.org/c608jbg03/g37.png |
Originally Posted by mikaly
(Post 3250354)
Example of what you can do with that old, scratched up trim:
http://mjslee.smugmug.com/Automotive.../IMG4010-M.jpg (3M Di-Noc Black Carbon Fiber Wrap) |
Anyone know what the part number is for those little Torx screws with the springs under them is? Want to order some replacements just in case. Great writeup!
|
did anyone happen to strip the two security torx bolts? the ones on the sides of the main steering wheel? Now i dont know what to do. I stripped the one on the right as it was really hard to get it to turn.
|
I tried to look up the part number for those torx bolts but they don't seem to be listed. Any Infiniti parts gurus out there?
|
Originally Posted by JakeB
(Post 3646722)
How exactly did you do that??
|
Originally Posted by twin_snails
(Post 3660458)
I tried to look up the part number for those torx bolts but they don't seem to be listed. Any Infiniti parts gurus out there?
Originally Posted by doublea88
(Post 3660277)
did anyone happen to strip the two security torx bolts? the ones on the sides of the main steering wheel? Now i dont know what to do. I stripped the one on the right as it was really hard to get it to turn.
Dealership (nissan or infiniti) should have these on hand too. |
A+ on this DIY man. my 08 had these issues and I brought it in to infiniti of coconut creek in so.fl and the swapped the entire wheel out (airbag, wheel, controls, bezel, everything) under the warranty. crazy. I know it will happen again someday and now that im out of the warranty I will be returning to this thread to see how to replace the $7 part. thanks man. good work!
p.s. carbon fiber overlay - so sick |
The G35 driver link many people have got it replaced under warranty, so the trim be replaced under warranty ? and if so what should i tell the dealership? they can say its wear and tear.
|
All times are GMT -4. The time now is 02:50 PM. |
© 2024 MH Sub I, LLC dba Internet Brands