Build Threads

This is my 2013 G37 Sedan Build Progress (Memo's Garage AZ)

Thread Tools
 
Search this Thread
 
Old Sep 30, 2020 | 01:06 PM
  #1  
G37Memo's Avatar
G37Memo
Thread Starter
Registered Member
 
Joined: Sep 2018
Posts: 19
Likes: 6
From: Gilbert, AZ
Smile This is my 2013 G37 Sedan Build Progress (Memo's Garage AZ)

Here's my baby, 2013 Journey, not much to look at on the outside, but it's what's under the engine is what I'm proud of and the tune. Had this car for about 3 years now:


-E-Bay front unpainted lip MST M01 18x9.5 wheels, with 245/45 tires:




-Dyno day at Dyno Comp, (no tuning, just running on dyno). Final #'s: 321.4HP, 260ishTQ:





-Megan racing strut brace and CPT Cold Air Intakes:




-Megan Racing headers and DC Sports headers. Unfortunately the steering linkage ended up hitting the megan driver side one. So ended on installing the DC ones instead with no more clearance issues: -
;





-Berk Resonated Test Pipes and Z1 Test Pipes, no longer running these because they both cracked on me. I'm now running the CWorks Design Resonated Test Pipes (Scroll down below): -



-Old setup of my custom 3" Magnaflow exhaust setup. This is a 36" size muffler (3" inlet/outlet), is welded at the Y-pipe. 3" piping leading to a black 4" tip. I had 2 small 8" resonators installed before the muffler, there is also a 16-18" resonator after the muffler: -
;






-Some of the places I've gotten stuff from. Wish I had an Admin Tuning sticker here as well:




-Mishimoto Dual Oil Cath Cans: -
-Z1 Upper and Lower Red silicone radiator hoses and radiator cap: -
-CPT cold air intakes wrapped in gold thermal heat film: -
-Rev9 Oil Cooler kit: -







-Agency Power Aluminum Crank & Alternator Pulley Kit (These are custom fit, took to a machine shop to mill off some material, probably the only G running these): -






-SOHO 3" Single Exit Exhaust , CWorks Design Resonated Test Pipes and Megan Y-Pipe (Used): -
;








-LED Sequential head lights/blinkers and GTR Red Push Start Button: -






-Rev9 Hyper Street II Coilovers (Drop = F: 1.2"; R: 0.8") and Godspeed Rear Toe Arms W/ Bucket Delete: -












-One last night Pic:





I'm thinking next I will try to wrap the G myself , IDK we'll see.

Some other mods that deserve a mention:

-Hotchkis front and rear stage 1 sway bars
-Yellow fog lights, LED turn signals/parking lights
-Tail lights as turn signal LED module
-R1 Concepts F&R Slotted and Drilled rotors
-Sport Style VIP Rear trunk lip spoiler and mudguards
-Interior LED's all around


Let me know if anyone has any questions, YouTube Channel Link and thanks for checking out my thread .

Last edited by G37Memo; Oct 25, 2020 at 10:52 AM.
Reply
Old Oct 25, 2020 | 10:48 AM
  #2  
G37Memo's Avatar
G37Memo
Thread Starter
Registered Member
 
Joined: Sep 2018
Posts: 19
Likes: 6
From: Gilbert, AZ
Pedal Commander

Last weekend I installed a Pedal Commander and holly crap this thing really works. It has mild, mid and ludicrous modes LOL:









Some track day prep vids coming soon, can't wait to hit the drag strip. Thanks for checking out my build thread build.
Reply
Old Nov 22, 2020 | 06:13 PM
  #3  
G37Memo's Avatar
G37Memo
Thread Starter
Registered Member
 
Joined: Sep 2018
Posts: 19
Likes: 6
From: Gilbert, AZ
Haven't updated in a while, here are a few more mods I've done in the last month, thanks for visiting my build thread:

-ISY Y-pipe and Cold air intakes DEI thermal insulation sleeves:








-Paddle Shifters and CF front bumper air duct inserts:







Torque Solution aluminum Transmission mount and got some 16x7 Enkie RPF1's with Nitto NT555R drag tires for the drag strip:







Finally got the G sedan to the drag strip, I think I did well, check it out:





More goodies coming soon, thanks for checking out my build thread
Reply
Old Feb 11, 2021 | 05:17 PM
  #4  
G37Memo's Avatar
G37Memo
Thread Starter
Registered Member
 
Joined: Sep 2018
Posts: 19
Likes: 6
From: Gilbert, AZ
Wow it's been a while since I've posted any updates, so here we go:

Installed ISR Long Tube Headers, best bang for the $$ when it comes to headers. The G has felt great, more power, smoother and no CEL:




My Rev9 Hyper Street 2 Coilovers broke, so I decided to change it up and went with BC Racing Coilovers:




Just for fun, took the G out on the town to have some fun and make some noise :


More coming soon, I have new CAI on the way, a re-tune and dyno time finally, thanks for visiting.
Reply
Old Oct 21, 2021 | 01:23 PM
  #5  
G37Memo's Avatar
G37Memo
Thread Starter
Registered Member
 
Joined: Sep 2018
Posts: 19
Likes: 6
From: Gilbert, AZ
Sheeesh! it's been 7 months since I've posted anything, lots has happened since :

The G's trans finally started to give up on me, so here was my response:









Bought a 2nd car and I'll be featuring on the channel soon:



It's going to be a fun end of the year and next year is going to be EPIC.
Reply
Old May 1, 2022 | 12:47 PM
  #6  
G37Memo's Avatar
G37Memo
Thread Starter
Registered Member
 
Joined: Sep 2018
Posts: 19
Likes: 6
From: Gilbert, AZ
Few updates for 2022 so far:

Thought I had spun a bearing:

VR30 Trans Swap Co$t Update:

Bad A/C Compressor Replacement:

More to come soon, thanks for watching .
Reply
Old May 2, 2022 | 02:27 PM
  #7  
projectpanda13's Avatar
projectpanda13
Registered Member
5 Year Member
Liked
Loved
Community Favorite
iTrader: (2)
 
Joined: Nov 2016
Posts: 1,299
Likes: 389
From: Atlanta, GA
great content, keep up the good work on the car and mods.
Reply
Old May 9, 2022 | 05:39 PM
  #8  
G37Memo's Avatar
G37Memo
Thread Starter
Registered Member
 
Joined: Sep 2018
Posts: 19
Likes: 6
From: Gilbert, AZ
Originally Posted by projectpanda13
great content, keep up the good work on the car and mods.

Sorry for the late response but thanks bro much appreciated. You too man, keep up the good work and the content as well .
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Eyeshield25
Video Share
0
Dec 28, 2015 05:56 PM
Carfreak70852
Motorsports / Track
7
Oct 26, 2015 10:13 AM
stm37s
The M - Spot
2
Apr 12, 2014 11:01 AM




All times are GMT -4. The time now is 01:17 AM.