When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Lol umm ok not sure how the pics (all 3 of them) are unrelated when it's a thread about modding a g37x so I'm just sharing my own and you had a similar setup so that's why I was asking how it all worked, if it did work. So you're saying all you did was switch up the tune/tuner and it's working normally now?
Yes sir! Car is wonderful now. Was having so many problems.
Rarely ill get a cold start that is rough. Most of the times it’s perfect 👌🏻
Lol relax guys it's not that serious, I'm not here to troll or "threadjack" anyone. I was just looking for some information from someone that had a similar setup.
Finally some goodies...going to do the comparison soon on dyno at soho motorsports.
Z1 plenum/eps throttle bodies vs RHM 75mm conversion.
We will be trying to tune to get the most out of both. Lots of data to collect. Also swapping to ecutek so also going to see which makes more uprev or ecutek...
😆😆🤣 haha to be fair the car is still on jack stands. Now for a different reason. Took the ksports off yesterday. Looking forward to swapping on the new ones. (Had an order issue, the shop that ordered the coils 2 months ago never ordered them lol. So I’m waiting again.
Haha first world problems
I’ll be driving up to soho Motorsports to retune on Friday the 23rd. Lol so hang tight till then. Lots of cool info coming!
Picking up a set of track tires tomorrow. Project is really coming together. Still have to get my emissions and tag stuff done also.
So I’ve been busy, since April I’ve swapped the following...
Tuners
Admin to soho
Intake
Admin to rabbit hole motorsports (with vstack)
Plenum
Z1 to rabbit hole motorsport 75mm conversion
Pcv delete
Eps to Rabbit hole motorsports
Throttle bodies
Eps 70mm to maxima 75mm
Lower manifold
Synolimit to z1 motorsports
Headers
Stillen to ppe (with parallel collector)
Exhaust
Fast intentions to soho ypipe and single exit
Coilsovers
Ksport to feal 441+
Soon to be swapping
Uprev to ecutek on the 23rd of this month.
Also upgrading to a 34 row oil cooler and moving the existing 25 row cooler that’s on the engine to the transmission. The Stillen is smaller than I’d like for built trans.
found a steal locally for these tires. $300 for all 4 tire
Still 9/32 left out of the 10/32 it comes new with...
(100 miles on the tires the guy decided he wanted staggered cobra wheels and can’t use these anymore)
