Deposit made :). Build Thread
Registered User
Joined: Oct 2014
Posts: 1,047
Likes: 104
From: Charlotte NC (sorta)
Whoa, Motion Lab? They are like 3 minutes from my office, and I pass them at least 3 times a week during my lunch break. All I see are Subaru WRX's out front, but sometimes I do see a Z.
How are they with Nissans? When I decide to start bolting things on, I'll need a good shop. They're on my list of shops to research.
How are they with Nissans? When I decide to start bolting things on, I'll need a good shop. They're on my list of shops to research.
Thread Starter
Registered Member
iTrader: (13)
Joined: Dec 2009
Posts: 6,098
Likes: 395
From: Framingham Ma,
Update time , Installed M370 intake , ZI HFC's, Etune, and just got a ported G37 intake ( Synergy) Will be testing them the end of the month on the dyno. Last 2 are the stock pics
Thread Starter
Registered Member
iTrader: (13)
Joined: Dec 2009
Posts: 6,098
Likes: 395
From: Framingham Ma,
Update a few more things I did the Abenko sport brakes all around from Z1 with SS lines, and the Z1 intake mani this past week, Will be dynoing on Saturday am to test the difference from the M370.
OP, can you clarify what I'm reading here? You installed the Motordyne M370 Intake Manifold two months ago and dyno'd the results, and now you're swapping that out for the Z1 Motorsports Intake Manifold and getting that dyno'd today? Actually, right now or an hour from now, LOL.
And you're about to show the difference between the two dyno runs?
Is that right?
And you're about to show the difference between the two dyno runs?
Is that right?
OP, can you clarify what I'm reading here? You installed the Motordyne M370 Intake Manifold two months ago and dyno'd the results, and now you're swapping that out for the Z1 Motorsports Intake Manifold and getting that dyno'd today? Actually, right now or an hour from now, LOL.
And you're about to show the difference between the two dyno runs?
Is that right?
And you're about to show the difference between the two dyno runs?
Is that right?
Last edited by IntricateDetail; Apr 25, 2015 at 09:40 AM.
Thread Starter
Registered Member
iTrader: (13)
Joined: Dec 2009
Posts: 6,098
Likes: 395
From: Framingham Ma,
Yes john !
Results were the same
So all Said and done the Z1 ....,.. Made the same WHP and 2 less WTRQ . Previous numbers were 287 WHP and 231 WTRQ. Numbers were the same all tho the M370 held the WTRQ longer than the Z1.
And this was with no adjustnt to my tune strait M370 to Z1 pulls.
Results were the same
So all Said and done the Z1 ....,.. Made the same WHP and 2 less WTRQ . Previous numbers were 287 WHP and 231 WTRQ. Numbers were the same all tho the M370 held the WTRQ longer than the Z1.
And this was with no adjustnt to my tune strait M370 to Z1 pulls.
