My RB Project, going all in!
#21
Administrator
Thread Starter
Thanks guys.
The VQ37 engine, tranny and ecu will go on sale locally but I have a strong feeling they will end up in my living room looking like this
The VQ37 engine, tranny and ecu will go on sale locally but I have a strong feeling they will end up in my living room looking like this
#25
Registered User
iTrader: (9)
Damn Sam, way to keep it different! I haven't been lurking on the forums much because of work and couldn't believe I missed this from a couple days ago.
The RB is one of my all time favorite sounding motors. Anyone that knows about cars will give you the "what the f*ck" look when you pull up to them.
The RB is one of my all time favorite sounding motors. Anyone that knows about cars will give you the "what the f*ck" look when you pull up to them.
#26
only in Dubai, one of the first RHD to LHD conversions on the Skyline cars was done there.
Anyways this will be an awesome project. you've planned out everything I guess. Any reason not going with the VK Motors, of course RB motor is nothing less or maybe better.
Anyways this will be an awesome project. you've planned out everything I guess. Any reason not going with the VK Motors, of course RB motor is nothing less or maybe better.
#28
Administrator
Thread Starter
Update: 26-11-2012
Gasket kit, head bolts and tensioner kit have arrived and have been dropped off at the shop. Aiming to start stripping down the G on Saturday!
The manifolds were just held against the head to measure clearances from wheel well, we may have to re-route the wastegate pipe.
Intake side should not be a problem
Gasket kit, head bolts and tensioner kit have arrived and have been dropped off at the shop. Aiming to start stripping down the G on Saturday!
The manifolds were just held against the head to measure clearances from wheel well, we may have to re-route the wastegate pipe.
Intake side should not be a problem
#30
Administrator
Thread Starter
It's simple, I wanted a straight 6 with a single turbo and a Nissan DNA. I don't know any LS swap specialists here either.