R3diK3r0u5's G
Thread Starter
Registered User
iTrader: (1)
Joined: Jul 2011
Posts: 162
Likes: 0
From: College Station, TX
Workin on it! Once the weather clears up I'll prob do the grille
it was a multiple step machine polish using Adam's Polishes and a porter cable 7424xp
it was a multiple step machine polish using Adam's Polishes and a porter cable 7424xp
Clean Car man!
I got a couple questions...
Hey are you using the Apple AUX cable? Are you just using the USB part of that cable to do the charging?
Also might be off subject but what's SSV? you mentioned you have an VSS switch? what exactly is a VSS switch and what does it do? haha sorry if that's a dumb question.
I got a couple questions...
Hey are you using the Apple AUX cable? Are you just using the USB part of that cable to do the charging?
Also might be off subject but what's SSV? you mentioned you have an VSS switch? what exactly is a VSS switch and what does it do? haha sorry if that's a dumb question.
Thread Starter
Registered User
iTrader: (1)
Joined: Jul 2011
Posts: 162
Likes: 0
From: College Station, TX
I have 6383.140
all plugged in for my audio and video

Your car has a "Vehicle Speed Sensor" that tells it when it is moving. The video/input for the nav screen is locked out during movement so you have to interrupt that signal in order to use your screen while moving. The switch connects/interrupts the VSS
Clean Car man!
I got a couple questions...
Hey are you using the Apple AUX cable? Are you just using the USB part of that cable to do the charging?
Also might be off subject but what's SSV? you mentioned you have an VSS switch? what exactly is a VSS switch and what does it do? haha sorry if that's a dumb question.
I got a couple questions...
Hey are you using the Apple AUX cable? Are you just using the USB part of that cable to do the charging?
Also might be off subject but what's SSV? you mentioned you have an VSS switch? what exactly is a VSS switch and what does it do? haha sorry if that's a dumb question.

Your car has a "Vehicle Speed Sensor" that tells it when it is moving. The video/input for the nav screen is locked out during movement so you have to interrupt that signal in order to use your screen while moving. The switch connects/interrupts the VSS
Thread Starter
Registered User
iTrader: (1)
Joined: Jul 2011
Posts: 162
Likes: 0
From: College Station, TX
updated the original post to maximum length
*Continuation of First Post*
-Fast Intentions RHFC
This was a huge pain to accomplish. I just realized, I have no pictures of the part or actual install, so here is a picture of my car under the knife for a handful of changes. Big thanks to the SG'Z team and friends who came out to lend helping hands. I never could have handled all that without you guys.

I will eventually record a video to hear the difference in the addition in contrast with my other videos.
-DIY Gloss Black Headlights
Wasn't as bad as expected. Took the headlights off, removed the ballasts, screws holding the two pieces together, and the miscellaneous plastic clips. Then baked them at 220 degrees for 9 minutes. WIth a little bit of effort, the lens then separated fine. If you plan to removed the parking light shroud, the tabs holding it to the housing is VERY FRAGILE! Trust me, I found out.





Have some other things to add but need to take pictures.
Thanks for checking it out and leaving your input!
Jd
*Continuation of First Post*
-Fast Intentions RHFC
This was a huge pain to accomplish. I just realized, I have no pictures of the part or actual install, so here is a picture of my car under the knife for a handful of changes. Big thanks to the SG'Z team and friends who came out to lend helping hands. I never could have handled all that without you guys.

I will eventually record a video to hear the difference in the addition in contrast with my other videos.
-DIY Gloss Black Headlights
Wasn't as bad as expected. Took the headlights off, removed the ballasts, screws holding the two pieces together, and the miscellaneous plastic clips. Then baked them at 220 degrees for 9 minutes. WIth a little bit of effort, the lens then separated fine. If you plan to removed the parking light shroud, the tabs holding it to the housing is VERY FRAGILE! Trust me, I found out.





Have some other things to add but need to take pictures.
Thanks for checking it out and leaving your input!
Jd
Thread Starter
Registered User
iTrader: (1)
Joined: Jul 2011
Posts: 162
Likes: 0
From: College Station, TX
honestly, i kinda miss the stock headlights o_0
but this is a good mix up
ill prob leave the chrome deck lid trim
once i have a diffuser, ill revisit the idea
but this is a good mix up
ill prob leave the chrome deck lid trim
once i have a diffuser, ill revisit the idea
Either way looks great man, you can always do the front end swap
, think I saw a guy on here with a black sedan do it.
Keep listening to us though we're going to break your bank
, think I saw a guy on here with a black sedan do it. Keep listening to us though we're going to break your bank
Nice car and mods man. I have vertini hennesy in the same offsets. I rub on the front and back on big dips. And I am not dropped too low either. I am surprised that you don't have any neg camber. Great looking car



Doesn't matter, still sick *** ride.