72130
INIFINITI G35 ADJ. UPPER ARM

These front upper control arms will give you -1 degree to +1.0 degree caster change and up to -2.5 degrees to +2.5 degrees camber change. Simply replace the OE front upper control arms and dial in your suspension angles with our patented sliding ball joint and caster plate. Whether you want to tune your suspension for the ultimate in handling performance, minimize tire wear or easily move back and forth between the two settings, these are the arms to get the job done.

Front Adjustment range: Camber: -2.5 degrees to +2.5 degrees
Caster: -1.0 degrees to +1.0 degrees
Installation time: .6 hr/side
Required: 1 kit per axle
Applications:
Infiniti
2007 & Up G35/G35x Sedan
2009 & Up G37 Sedan
2008 & Up EX35 FWD/AWD
2008 & Up G37 Coupe
Nissan
2009 & Up 370Z



72260
G35/37 REAR CAMBER ARM

The 72260 Adjustable Rear Arm for the 2007 G35 offer maximum adjustment for camber and toe. This is the perfect kit to adjust rear angle for optimum handling and to maximize tire life, adjusts camber+/-4.0 degrees and toe +/- 3.0 degrees. Use the 85125 rotary files to elongate the OE toe slots.

Rear Adjustment range: Camber ±4.00 degree Toe ±3.00 degree
Installation time: .6 hr/side
Required: 1 kit per wheel
Applications
72050
Nissan: 2002 & Up 350Z
Infiniti: 2003 - 07 G35 Coupe, 2003 - 06 G35 Sedan
72260
Infiniti: 2007 & Up G35 Sedan