Brakes, Suspension, Wheels & Tires
Rollers and Rubbers (View All Posts)

Vossen CV-3 X KW V3

Old Oct 29, 2012 | 01:58 AM
  #1  
nigelktm's Avatar
nigelktm
Thread Starter
Registered User
iTrader: (1)
 
Joined: Nov 2010
Posts: 189
Likes: 0
From: Toronto, ON
Vossen CV-3 X KW V3

Hi guys!!


I have the CV-3 (+20/+25) with falken tires and the GREAT KW CV-3 coils. Just wondering if there is any members here that have the same setup and would like to share their damper setting, etc ? I am trying to find some daily driver setting.


PS please state your ride height too
Reply
Old Oct 29, 2012 | 11:00 AM
  #2  
Seraphix's Avatar
Seraphix
Registered User
iTrader: (9)
 
Joined: Jan 2012
Posts: 650
Likes: 36
From: Orlando, fl
All depends on how low you want to go. I had that set up at 25.5" fender to ground and was running 9 front and 11 rear. Ride was a little rough not jarring though. I raised the rears to 25 7/8 and it rode better than stock. Most guys reverse those numbers 11 F and 9 rear, and the ride is excellent as well from what I read on here. I just didn't want to keep going back to the rears to adjust them. Good luck bud
Reply
Old Oct 29, 2012 | 11:11 AM
  #3  
ECain18's Avatar
ECain18
Registered User
iTrader: (15)
 
Joined: Feb 2010
Posts: 954
Likes: 19
yes i rode with 11 front and 9 rear and it rode much better than stock. Stiffer but much smoother and tighter if that makes sense.
Reply
Old Oct 29, 2012 | 11:12 AM
  #4  
ECain18's Avatar
ECain18
Registered User
iTrader: (15)
 
Joined: Feb 2010
Posts: 954
Likes: 19
edit: just saw you have cv3's. They are 20" wheels and heavy as well so your ride would probably be rougher than mine due to the wheels. You might want to go slightly lower on your settings. Each click makes a big difference. you might want to do 10 front/8 rear or 9 rear
Reply
Old Oct 30, 2012 | 10:39 AM
  #5  
nigelktm's Avatar
nigelktm
Thread Starter
Registered User
iTrader: (1)
 
Joined: Nov 2010
Posts: 189
Likes: 0
From: Toronto, ON
Thanks guys!! No wonder why I feel so damn hard, my mechanic did 12F/10R. What is the compression phase adjustment for your car?
Reply
Old Nov 1, 2012 | 09:15 AM
  #6  
jarvo's Avatar
jarvo
Registered User
 
Joined: Oct 2012
Posts: 129
Likes: 3
Smooth and tight.
All night.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Dillybar12
Wheels & Tires
6
Nov 1, 2015 07:23 PM
stm37s
The M - Spot
14
Oct 23, 2015 01:56 AM
stm37s
The M - Spot
0
Oct 1, 2015 06:53 AM
John B
Private Classifieds
3
Sep 27, 2015 11:41 PM
kinchi
Wheels & Tires
1
Sep 25, 2015 12:04 AM


Thread Tools
Search this Thread

All times are GMT -4. The time now is 07:22 AM.