help with wheel offset and suspension
help with wheel offset and suspension
A local guy is selling his wheel off of a hyundai genisis they are Stance SC-5ive Front 20x9 +20 Rear 20x10.5 +27. What do you guys think? i have no clue about offset and stuff like that. I am dropped on KW v1 and have the rear spc kit and toe. There is also custom made box in the trunk with two 10s to keep in consideration for weight. Will this setup work on my car? what do i need to do. I dont like the tucked in look or too much poke. I want to sit flush with not too much gap. Thanks moe
Trending Topics
You will be fine. I actually like those offsets a lot for a G coupe. I have run a few different set-ups, among them A) 10.5" and 9.5" (+22) all around and B) 10.5" (+25) and 9.0" (+27). I don't like the car slammed or the stretched/poke fad, either. The offsets you are looking at are in the perfect range, in my opinion.
You will be fine. I actually like those offsets a lot for a G coupe. I have run a few different set-ups, among them A) 10.5" and 9.5" (+22) all around and B) 10.5" (+25) and 9.0" (+27). I don't like the car slammed or the stretched/poke fad, either. The offsets you are looking at are in the perfect range, in my opinion. 

One previous set-up
275/30/20 on 20"x10.0" (+35)
245/35/20 on 20"x9.0" (+25)
Another previous set-up:
275/35/19 on 19"x10.5" (+22)
255/40/19 on 19x9.5" (+22)
Current set-up:
285/30/20 on 20x10.5" (+25)
255/35/20 on 20x9.0" (+27)
*Tire selection was important here*
I have a 2012 g37S sedan with eibach pro kit springs and looking to purchase Stance SC5 wheels with 20x8.5 +35 front and 20x10 +35 rear with 245/35-20 and 275/30-20 tires. I was going to get Bridgestone RE760 sports but the guy at wheelstudio said it might scrape in the rear if I have people in the rear. He said they are wider then falkens which he recommended. I was hoping that I would not be scraping at all. Debating between the Hankook V12 and the RE760's. Any input would be appreciated.
Thread
Thread Starter
Forum
Replies
Last Post





