Help New Car tires sizes
new tires :D
totally forgot to post, here are the yoko 245/45/18 envigors 
They are not noticeably bigger when looking at the side, but looking from behind is another story
I should of taken before/after pictures.
Grip quality is absolutely better in every way compared to the lame oem dunloops. No more slips, and i have 999% better grip on wet pavement. And traction control rarely shows up anymore. Not afraid to go past the 2K rpm line on wet pavement anymore
(still stay under 4K lol)

They are not noticeably bigger when looking at the side, but looking from behind is another story
I should of taken before/after pictures.Grip quality is absolutely better in every way compared to the lame oem dunloops. No more slips, and i have 999% better grip on wet pavement. And traction control rarely shows up anymore. Not afraid to go past the 2K rpm line on wet pavement anymore
(still stay under 4K lol)
Steering feels a little heavier at first, but that seems to always happen when I get new tires. After 2 weeks, it seems normal now, which is very grippy. No intention on lowering yet, don't really notice a difference in height on fender. Its suppose to be only a 4mm difference in total diameter, I think that's hardly noticeable. I plan on getting the most out of my current suspension, and avoiding driveway scraps for now. Once my current suspension gives out(probably never huh?), I plan on moving to coilovers, or w/e is best at the time
Oh, a PSI question, when i got the new tires, they filled it to 40PSI, is that right?? Car specs says suppose to be 34psi. I lowered it back down to 35PSI, trying to get the center to wear more since the inside is suppose to wear more. Took it out to dealership for only oil change the next week, and they bumped it up to 38psi when i checked. These are all cold readings. What is the correct PSI???
Do you have any pictures showing the whole car with your new tire set-up? They look awesome though...
Ron
Ron

Steering feels a little heavier at first, but that seems to always happen when I get new tires. After 2 weeks, it seems normal now, which is very grippy. No intention on lowering yet, don't really notice a difference in height on fender. Its suppose to be only a 4mm difference in total diameter, I think that's hardly noticeable. I plan on getting the most out of my current suspension, and avoiding driveway scraps for now. Once my current suspension gives out(probably never huh?), I plan on moving to coilovers, or w/e is best at the time 

Don't have any pics of whole car, should of done it when i washed it. It'll be a while before i wash it again for another pic
I might forget by than. Its nothing special, just looks like a normal stock blue slate g37 coupe with a shinier stillen exhausts
I might forget by than. Its nothing special, just looks like a normal stock blue slate g37 coupe with a shinier stillen exhausts
Did you find out the proper tire PSI for both front and back?
Thanks,
Ron
Thanks,
Ron

Oh, a PSI question, when i got the new tires, they filled it to 40PSI, is that right?? Car specs says suppose to be 34psi. I lowered it back down to 35PSI, trying to get the center to wear more since the inside is suppose to wear more. Took it out to dealership for only oil change the next week, and they bumped it up to 38psi when i checked. These are all cold readings. What is the correct PSI???
earthmaster, not these were 225/50/18 stock all around upgrade to 245/45/18. The 19" rim have different widths in front and back, don't think you should do the same thing.
Ron, nope. I'm just sticking with 35PSI. Ideally, you should be going by the car specs, which is 34psi. I believe PSI on a tire spec shouldn't change with different widths because the load psi is still the same. I pump 1 or 2 psi more, b/c there is a stock negative camber that causes more wear on the inside of the tires. I'm only hoping to offset this inner wear by putting more wear in the center.
RE760AS are a good choice , but too overkill for me
For the price, and purpose, I went with Yokos Avids W4S. Not as good for icy roads, but i don't drive on icy roads
. They are just as good as the re760as on dry/wet conditions, so i thought that's the best bang for buck quality.
Ron, nope. I'm just sticking with 35PSI. Ideally, you should be going by the car specs, which is 34psi. I believe PSI on a tire spec shouldn't change with different widths because the load psi is still the same. I pump 1 or 2 psi more, b/c there is a stock negative camber that causes more wear on the inside of the tires. I'm only hoping to offset this inner wear by putting more wear in the center.
RE760AS are a good choice , but too overkill for me
For the price, and purpose, I went with Yokos Avids W4S. Not as good for icy roads, but i don't drive on icy roads
. They are just as good as the re760as on dry/wet conditions, so i thought that's the best bang for buck quality.
Thanks!
Ron
Ron

earthmaster, not these were 225/50/18 stock all around upgrade to 245/45/18. The 19" rim have different widths in front and back, don't think you should do the same thing.
Ron, nope. I'm just sticking with 35PSI. Ideally, you should be going by the car specs, which is 34psi. I believe PSI on a tire spec shouldn't change with different widths because the load psi is still the same. I pump 1 or 2 psi more, b/c there is a stock negative camber that causes more wear on the inside of the tires. I'm only hoping to offset this inner wear by putting more wear in the center.
RE760AS are a good choice , but too overkill for me
For the price, and purpose, I went with Yokos Avids W4S. Not as good for icy roads, but i don't drive on icy roads
. They are just as good as the re760as on dry/wet conditions, so i thought that's the best bang for buck quality.
Ron, nope. I'm just sticking with 35PSI. Ideally, you should be going by the car specs, which is 34psi. I believe PSI on a tire spec shouldn't change with different widths because the load psi is still the same. I pump 1 or 2 psi more, b/c there is a stock negative camber that causes more wear on the inside of the tires. I'm only hoping to offset this inner wear by putting more wear in the center.
RE760AS are a good choice , but too overkill for me
For the price, and purpose, I went with Yokos Avids W4S. Not as good for icy roads, but i don't drive on icy roads
. They are just as good as the re760as on dry/wet conditions, so i thought that's the best bang for buck quality.Thread
Thread Starter
Forum
Replies
Last Post




