Brakes, Suspension, Wheels & Tires
Rollers and Rubbers (View All Posts)

Fitment Question

Thread Tools
 
Search this Thread
 
Old Sep 18, 2008 | 02:07 AM
  #1  
RB-What?'s Avatar
RB-What?
Thread Starter
Registered User
 
Joined: Jun 2008
Posts: 10
Likes: 0
Fitment Question

Hey guys could you tell me if how these would fit or would they fit on my G37s... They are Advans
WHEELS:
Fronts 19X9 +22
Rears 19X10 +25

TIRES: Nitto 555
Fronts 245/35ZR/19
Rears 275/35ZR/19
Reply
Old Sep 18, 2008 | 02:21 AM
  #2  
gan78mao's Avatar
gan78mao
Registered User
iTrader: (1)
 
Joined: Sep 2007
Posts: 2,880
Likes: 1
From: SoCal, Irvine
u should be ok with some negative camber
real aggressive offsets.
Reply
Old Sep 18, 2008 | 03:36 AM
  #3  
TerribleONE453's Avatar
TerribleONE453
Registered User
 
Joined: Oct 2007
Posts: 4,404
Likes: 5
From: Chatsworth CA
are you dropped?
Reply
Old Sep 19, 2008 | 02:41 PM
  #4  
RB-What?'s Avatar
RB-What?
Thread Starter
Registered User
 
Joined: Jun 2008
Posts: 10
Likes: 0
Yes it will be on H&R's soon with a rear camber kit
Reply
Old Sep 19, 2008 | 03:19 PM
  #5  
The1andOnly's Avatar
The1andOnly
Registered User
iTrader: (2)
 
Joined: Nov 2007
Posts: 3,385
Likes: 0
From: SoCal
Wow, on H&R's you have I high chance of rubbing even with negative camber. I had to raise up the rear ride hight and stiffen the shocks of my JIC coils when I got my Volks on since I was rubbing. I have a 10.5 +33 with 275/35 tires. I still rub a bit on really hard bumps.
Reply
Old Sep 19, 2008 | 03:21 PM
  #6  
TerribleONE453's Avatar
TerribleONE453
Registered User
 
Joined: Oct 2007
Posts: 4,404
Likes: 5
From: Chatsworth CA
it should be an really aggressive fitment.. but might work.
Reply
Old Sep 19, 2008 | 03:23 PM
  #7  
The1andOnly's Avatar
The1andOnly
Registered User
iTrader: (2)
 
Joined: Nov 2007
Posts: 3,385
Likes: 0
From: SoCal
It might work on stock height, but not sure once the H&Rs get put on.
Reply
Old Sep 19, 2008 | 04:03 PM
  #8  
GiGGaplease's Avatar
GiGGaplease
Registered User
 
Joined: Jul 2007
Posts: 6,301
Likes: 1
From: al, eguor notab
Originally Posted by The1andOnly
It might work on stock height, but not sure once the H&Rs get put on.
anything will work with stock height. dont h&r gives like a 2 inch drop? you will surely be rubbing then. im not even dropped and i have a 2 finger clearance at the back, just think about it when you drop it, eek. gl
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
helloandchau
Private Classifieds
8
Oct 6, 2015 05:26 PM
ay37
Body Interior Exterior Lighting
4
Sep 15, 2015 08:51 AM
Dillybar12
Engine, Intake and Exhaust
6
Sep 14, 2015 12:54 PM
Detailed Image
Lighting/Cleaning Products
0
Sep 11, 2015 08:33 AM
mmnjtwa
Brakes, Suspension, Wheels & Tires
4
Sep 7, 2015 02:27 PM




All times are GMT -4. The time now is 09:28 PM.