I know this might sound like an odd question, but I found a crazy deal on some M37 lowering springs and I was wondering if they would fit a '15 Q60S. My line of thought was that since a 2015 Q60 is basically just a 2013 G37, and the G37 and M37 are fairly similar, the springs might be the same too. I'm on a pretty tight budget, so any amount of money saved for me is a godsend.

Here are the ones I found: https://eibach.com/us/i-2624-pro-kit-performance-springs-set-of-4-springs.html

 

Look up their spring number for the G37 and see if they match.

 

It will but your car will sit higher

 

That might actually be a good thing.

 

Hmm. So if I wanted lowering springs, but not as low as most of the kits, and didn't want to spend the coin on coilovers...

 

Get 370z nismo struts springs off z forum used good for .5 to .75 drop

 

So they would fit fine, but only lower it a fraction of what is stated?

 

Yes did this on my g35 and g37

 

That's about right. Much more than that and I'll be tearing up the nose on potholes and the ubiquitous "we didn't cut the curb for the driveway entrance" around here.

Actually, I want to see what sort of gap I have once I've got the 19" coupe wheels on. The 20s it came with don't quite have the right size tires.

 

370z setup allows you to align to spec