I just took my car for an alignment and I got the results. I was not surprise for the front because I haven't bought a kit but the rear was a surprise. I have the SPC kit (camber and Toe)and still it is off.
I have the stagger tires 19x8 for the front and 19x8.5 for the rear from my old G35 coupe sport
My camber after alignment is LR:-1.8, RR:-1.7 and the Toe is LR:0.12 and RR:0.12

Based on your experience what else have you done to bring the car with in specs if that is feasible.

 

Your rear camber is fine but the toe-in needs to be reduced. Were the toe slots enlarged?

 

Yes, the slots were enlarged I was there when they were doing it. This was my surprise, also they said that the Toe was max out. I am lost, and I am going back again to make sure they adjust the Toe bolt.

 

they still coulda done it wrong

 

Yeah, something is amiss there, you should have no trouble getting easily in spec both camber & toe. I was dropped 2" prior to my coilovers and camber is -1.0 and toe .08.

Maybe they elongated the slots but put the old toe bolts back in???

And w/ those SPC camber arms you can get camber positive if you want so they can be adjusted much better assuming the entire install is correct.

 

Where did you go for an alignment? I went to a shop that specializes in modified cars, they asked me how much camber I wanted which was pretty confidence inspiring to be honest rather than just trying their best and coming up with a result.