Not sure. But my stoptech's squeal when I back up.

 

I have no issues using akebono brakes. Reinstall using fresh hardware and plenty of brake lube.

I also find most warped rotors aren't warped and they don't need resurfacing. Rust forming where the hub annd rotor mate is definitely the biggest culprit. Whenever i install new brakes on my car i make sure to scrub the rust off the hubs mating surface and apply a bit of brake grease to prevent corrosion.

i suspect most mechanics getting paid book rate aren't scrubbing your hubs with scotchbrite and tightening your lugnuts to 80 ft/lbs

 

Thanks. Must be the overall design that keeps the dust in and that contributes to the issue.

 

Aside from lubricating all the contact points, you might consider anti-drag clips as well

 

I have the full stoptech kit on 2 g37s coupes no squealing and better stopping.