Megan Racing Springs

Thread Tools
 
Search this Thread
 
Old Apr 23, 2017 | 02:08 AM
  #1  
LouieGee37's Avatar
LouieGee37
Thread Starter
Registered User
 
Joined: Apr 2017
Posts: 17
Likes: 0
Megan Racing Springs

Debating on lowering my car a bit more, right now I have the Eibach pro kit. I was looking at the Megan Racing Orange Performance Springs, does any one run these? If so can you please let me know how they feel. Thanks
Reply
Old Apr 23, 2017 | 09:54 AM
  #2  
blnewt's Avatar
blnewt
Movin On!
iTrader: (13)
 
Joined: Nov 2009
Posts: 24,876
Likes: 4,951
Welcome to the site Louie. If your G is a RWD I'd look into the Tein Basis Z coilovers, cost less than $500 shipped and you can get just the drop you want. These will drop lower than Eibach but still retain a more comfortable ride. If you drop lower than your current Eibachs you should get a rear camber/toe kit at a minimum.
Reply
Old Apr 30, 2017 | 08:53 PM
  #3  
LouieGee37's Avatar
LouieGee37
Thread Starter
Registered User
 
Joined: Apr 2017
Posts: 17
Likes: 0
Originally Posted by blnewt
Welcome to the site Louie. If your G is a RWD I'd look into the Tein Basis Z coilovers, cost less than $500 shipped and you can get just the drop you want. These will drop lower than Eibach but still retain a more comfortable ride. If you drop lower than your current Eibachs you should get a rear camber/toe kit at a minimum.
So I went with the coilovers you recommended. Thanks for the recommendation, I have one more question, is there a DIY out there specifically for these coilovers on a G37? I've been looking but no luck. Thanks again
Reply
Old Apr 30, 2017 | 09:20 PM
  #4  
blnewt's Avatar
blnewt
Movin On!
iTrader: (13)
 
Joined: Nov 2009
Posts: 24,876
Likes: 4,951
Here's a review thread on site, I haven't installed these but have DIY'd coilovers & springs and these are pretty straightforward, but you will need to use the top mounts from your factory F&R shocks so that adds an extra step to the coilover installs you find on the DIY folder. Might send a PM to 4DRZ about any specifics. Here's his review thread
https://www.myg37.com/forums/brakes-...edan-6spd.html
Reply
Old May 1, 2017 | 04:09 PM
  #5  
LouieGee37's Avatar
LouieGee37
Thread Starter
Registered User
 
Joined: Apr 2017
Posts: 17
Likes: 0
Originally Posted by blnewt
Here's a review thread on site, I haven't installed these but have DIY'd coilovers & springs and these are pretty straightforward, but you will need to use the top mounts from your factory F&R shocks so that adds an extra step to the coilover installs you find on the DIY folder. Might send a PM to 4DRZ about any specifics. Here's his review thread
https://www.myg37.com/forums/brakes-...edan-6spd.html
cool man thanks for the help!
Reply




All times are GMT -4. The time now is 10:43 PM.