I just bought all the hardware for lowering my car with wheels and tires. I want to know what I should pay or expect to pay for Installation of following hardware and Alignment:

Car: 2013 G37 Sedan RWD

- Eibach Springs
- SPC Front Camber Kit (Arms)
- SPC Rear camber kit
- SPC Toe bolts
- Wheel Sensor reprogram ( Wheels are already mounted and balanced )
- Alignment
- Wheels are 20's.

Any input on this will be appreciated. Thanks :-)

 

Well in NY they are roughly the following:

- Eibach Springs (150-200)
- SPC Front Camber Kit (Arms) (100-150)
- SPC Rear camber kit (50-100)
- SPC Toe bolts (50-100)
- Wheel Sensor reprogram ( Wheels are already mounted and balanced ) (30-50 each wheel)
- Alignment (100-200)

 

Moe, If you can find a shop with those prices for installation of springs, then you're golden. Reason I got rid of the springs was due to quotes for $500 for labor. Told me it was a 5 hr job.

I bought the CO's and did them myself. It's not too hard with YouTube and the DIYs on here. But if you don't have the tools, then it's understandable. With alignment, pep boys has a $99 1 year unlimited alignment that I bought. I did an alignment while stock and then again after suspension work with no charge. If I add anything else within this time, i can go back with no worries or checkbook. They also quoted me about $200 total to install and program tpms sensors with remount and balance. I bought an extra set. For the past 2 months, I've just been ignoring the tire light. Express gave me a cheaper price to switch my old ones over, but i don't want to go through the trouble if I ever go back to stock. I'm just waiting till later to add the new ones.

 

I had my swift springs installed for 250.00 at a local performance shop that specializes in Nissan/Infiniti. I got quotes from 800 to 400 and best one was 250.00

Aligment: I pay about 65.00 to 70.00 for a RWD aligment at network aligment local to me.

The rest I have no idea