Endless Brakes for G37 Sedan
Thread Starter
Registered User
Joined: Nov 2010
Posts: 30
Likes: 0
Endless Brakes for G37 Sedan
So, I'd like to begin by thanking everyone who's been willing to answer my many questions these past few months while I've been slowly completing my build. I'll be sure to get pictures up soon, but just have the brakes left for now. That being said, I was wondering if anybody had any knowledge or information regarding and Endless BBK for the 2009 G37 Sedan. I know they have one for the coupe, but not quite sure if they make one for us. Anyways, its between that and some Brembro Gran Turismos. Thanks again!
If it fits on the coupe or the 370z, it will fit on the sedan. That goes or sway bars, suspension, intakes, cats, midpipe, y pipe.. Any tranny upgrade also. These cars are almost identical! For BBKs i heard the AP racing kit from stillen works perfectly. The brembo kit shouldnt be bad either. Alcon also works. You have a lot of options and they all are equally good if you use good pads and fluid.
Thread Starter
Registered User
Joined: Nov 2010
Posts: 30
Likes: 0
If it fits on the coupe or the 370z, it will fit on the sedan. That goes or sway bars, suspension, intakes, cats, midpipe, y pipe.. Any tranny upgrade also. These cars are almost identical! For BBKs i heard the AP racing kit from stillen works perfectly. The brembo kit shouldnt be bad either. Alcon also works. You have a lot of options and they all are equally good if you use good pads and fluid.
I am leaning towards Endless Brakes because I thought they would be more unique than the alternative Brembos for not too much more.
Thread Starter
Registered User
Joined: Nov 2010
Posts: 30
Likes: 0
Anybody have any thoughts on the Project Mu BBK, seems to be a lower tier than the Endless and Brembo, but what's all about its JDM legend 
?
?
Last edited by NightmareGT; Aug 22, 2011 at 11:50 PM.
Trending Topics
Thread Starter
Registered User
Joined: Nov 2010
Posts: 30
Likes: 0
Good deal Bro...you got Project mu for less than endless? I must be looking in the wrong places for the Project Mu because they seem to be higher..much higher...PM your supplier I may just go with Project Mu if its cheaper...
