Eibach springs on a G37xS with front chin?
#16
Registered User
Thread Starter
what do they mean when they say will need a "PRO-KIT will require PRO-ALIGNMENT kit 5.72265K or 5.72260K installed to adjust alignment to OE specification"
How much is this kit? anyone have part numbers? Is this the same as a basic alignment you get done at belle tire? or do they need a specific part?
How much is this kit? anyone have part numbers? Is this the same as a basic alignment you get done at belle tire? or do they need a specific part?
#17
Registered Member
iTrader: (1)
Join Date: Jan 2010
Location: chicago
Posts: 61
Likes: 0
Received 0 Likes
on
0 Posts
Those ARE the part numbers for the front and rear camber kits. They provide additional camber adjustablity when doing an alignment. You'll most likely need those to get the alignment back to stock specs.
#19
Registered Member
iTrader: (1)
Join Date: Jan 2010
Location: chicago
Posts: 61
Likes: 0
Received 0 Likes
on
0 Posts
I believe the fronts will fit the X. According to the Eibach and SPC sites (SPC makes the parts for Eibach), they fit on AWD sedans too. SPC Application Search - Product
The part #s in the earlier post are actually for rear camber kits, the front part # for Eibach is 5.72130k
The part #s in the earlier post are actually for rear camber kits, the front part # for Eibach is 5.72130k
#20
Registered User
Thread Starter
any idea how much the camber kits normally are? I tried to look on the eibach website and couldnt find the kits....maybe Im looking at the wrong place. I figured it would be with the springs??
#22
That info is not correct. 6379 is for a nissan versa. I just called Eibach. They have springs for the G37X coupe but nothing for the G37X sedan. They never got a G37 Sedan to test since they are located in CA. HOWEVER, they do have springs for the G35X Sedan which just came out #6399.140.
Eibach tech stated that the all vendors should have the AWD springs for the G35X by now. I am going to place an order since the G35X and G37xS are not that far off in weight and should have same suspension hardware.
Eibach tech stated that the all vendors should have the AWD springs for the G35X by now. I am going to place an order since the G35X and G37xS are not that far off in weight and should have same suspension hardware.
Thread
Thread Starter
Forum
Replies
Last Post