Hey I have a 2010 g37s 6mt and I’ve been trying to trouble shoot my faulty reverse lights. On first thought it may seem the reverse switch could be bad, but the car knows it’s in reverse because my camera still turns on. I checked for any possible fuses that could be blown which seemed like they were all intact. I replaced the bulbs with new ones and sent power to it using a power probe from the lightbulb housing and verified that the lights turn on. So I suspect there’s a break in the wire somewhere. This is where I need help. I want to know which pins to check on the harness that goes into the back of the trunk on the left side, and where that harness goes throughout the body to see if I can see any breaks in the wire visually.