Hey everyone, I have one window on my 2010 G37 that won't auto up with either the driver controls or the control on that door. I am not really sure where the issue is coming from. Anyone have any ideas where I can start? Thanks in advance.

 

Never mind, figured it out and can't figure out how to delete post.

 

What was your solution?

 

Probably just had to do the reset procedure. Hold the button down 5 seconds, then hold the up button for like 5 seconds.

 

I had a window pull the same crapola, reset wouldn't work. Dealer replaced the motor.

 

I guess this will happen every time you need to reset your computer by disconnecting the battery. This procedure works by dropping the window then holding it up 5 seconds after the window has closed. Repeat for all windows.

 

Yeah, I did that. It won't work on my passenger front window. The other 3 are fine though

 

I did all 4 of my windows. When I first purchased my car I was messing around and i was able to lower all the windows by inserting the key and turning it to the unlock position. Well when I turned in to the lock position all but one window went back up. I have yet to try that after I was able to get the auto-up feature to work on all my windows.