Ok so last night i was putting in the led fog lights i bought from diode dynamics and i discovered the light wont go throught the hole in the head light. So i was going to put the stock one back on and now that fog light on that side does not work.......help?

 

Trust me i had the same conclusion, what a fail on both of our parts...

as for the bulb maybe you touched it with you finger and it fused .... i'm sure you didn't do anything to blow the fuse ... check the fuse box for the fogs maybe it blew because the LED SMD you bought took to much power to turn on ...

Let me know if your fuse was blown

 

i cant find the headlight integrated fog light fuse. i found some next to the battery but that was it. and is LEDs not an option if this happens alot. what a pita!

 

just bought some 12-SMD Side-Shine H1 LED Bulbs For Fog Lights from ijdmtoy. they seem slim enough to fit through the hole without cutting. can anybody confirm or deny.

 

You really are into the LED seen, well i took out my entire headlight so i had a really good look and in my opinion there is no way you can get led's into the fixture the clearance is just not there.

Just buy from china the blue H1 bulbs and problem solved i ordered for me it takes 2 weeks.

Btw did you get you original fogs working again ?

 

no, dont know where the fuse is. and i havent had time yet.