Oki370GT

These lights look very promising. Anyone know what base fits our parking lights? The sylvania site says 2825, does that mean they dont make one for our cars?

V3 Triton - Universal System

MoonliteMadness

Our parking lights are a standard wedge bulb (158, 168, 194, 921, 2825). I just installed these VLEDs in my parking lights and I'm pleased with the output and how they match our HIDs. I previously had 6K LEDs in my parking lights and they were too blue and did not match our HIDs.

5K WHITE 10 LED CANBUS PROOF 194 LED LIGHT BULBS 158 168 2825 921 | 1 PAIR

blondesamurai

Right now they only make them for our turn signals. It's the 7443/7440 bulbs. I have them, and they are way brighter than the previous ones I had. Way more expensive too.

mj_39

iTrader: (4)

^ No problems with the hyperblink system?

Oki370GT

I hope they make a parking light bulb for us. These would make a great DRLs.

awais

iTrader: (4)

Are they brighter than stock filament bulbs? Can you post video please.

Thanks

blondesamurai

No hyperblink, I have load resistors from my previous LEDs. They look pretty bright, they show a demo video on YouTube, I don't have the link, but it shows the tritons on a f150.

blondesamurai

Heres the vid. Stock on the passenger (left) side, tritons on the driver (right).

rpkg37xs

can you list the part #s if you have i have a 11 sedan with the 7443 front turn signal / parking light what base adapter did you use they list two 7440/7443 or 7443ck i don't know the difference . thanks

blondesamurai

It's the standard 7443/7440. Our cars don't use the ck bulbs. I believe they just released the 2nd gen triton LEDs. I have the 1st gen. Supposedly the newer ones are slightly brighter. The only bad part is figuring out how to make them snug. The kit comes with some small screws that you need to arrange on the base (predrilled holes) to match your bulb seats.