I got the ones from jdmtoy... I'll install soon. I ck'd them today and they are correct polarity. I'm going to try these as drls in the fog position and wire my custom fogs to the infiniti fog light switch....

 

I tried a while back; our H1 housings are very thin and the wide/square LED part could not fit through the bulb socket. You would need to try an H1 LED bulb that is flat (ie leds on either side of the circuit board)

 

Let us know how it turns out. PLease post pics

 

I'll check that out, if true, I don't see why I couldn't open up, the opening a little with a uni-bit....

 

^^^ this is true, I'm returning mine and ordering these flatter bulbs

H1 LED Bulbs Infiniti G37 Fog Lights Honda S2000 DRL Daytime Lights

 

How did these turn out? From what I understand using LEDs in the fog position are more for DRL purposes as the light projection is weak. How did these turn out?

 

Yeah, I'm not worried about light output on the fogs, I wanted a color match with my hids and parking/city LED, which are a 6k color.... My LED/drl light strips that I mounted down in the lower grills ended up being brighter then the fogs anyway!! Now everything matches.... I'll get around to posting some pics soon....