i am stuck between 6000k,8000k,10000k for my 2011 g37 headlights

 

what lights are these for? Personally for headlights I like 6 and foglights I like 8. Higher than 8 is too much blue for me.

 

For regular lights get vled 6k with blue tint,

 

6000k no higher. Unless you want unusable light (can't see) and to look like a punk kid that everyone normal laughs at.

Every brand varies a little bit on there advertised temperatures. The set I put in my other car was originally 6000k white/blue and i sent them back for 5000k pure crisp white with a tint of blue. Most OEM are 4300k, the most "usable" light.

 

id go no lower than 5000k and no higher than 8000k. 6000k is what i have and its as white as my iron man white leds. on the road you get no crappy yellow haze, everything is white. looks very upscale. 8000k lights look nice too but a bit blue for oncoming drivers. aside from that, they look pretty much as good as 6000k from the driver's perspective. 10000k is nice only on show cars. anything on the street with them looks ricey or just plain stupid. but thats just me

 

vleds 6000k looks like ebays 8000k

 

Trust me vled 6k, you'll like it, then change the fogs too and get a led in the drl

 

dont be a ricer. please.

 

i dont have drl's

 

another vote for 6k, Anything over than 6k is for civic ricer IMO

 

if i get replacements will that cut off my high beams

 

Oh ya! The 2011 is the old fog as a drl, so make that led, then the fog 6k and ur headlight 6k and no it won't cut off it's a bulb swap no big deal mines ok

 

No, the high beam is has nothing to do with the bulb you use. Nothing physically happens to to bulb. Their is a shield inside the headlight that moves and reflects the light higher when you use your high beams. You can hear it moving when you hit the high beam switch.

 

I have used 4300k on all my vehicles. totally WHITE light and very bright. Blue/purple is ricey.

 

5000k pure white from ddmtuning.