roughx021

Does anyone know what the installation of the JP Vizage entails. I know I can use double sided tape and screws. Mine is warped and on the inside fender its doesnt seem to follow the fender line. I can get one screw on the top, but the bottom of the lip hangs off the bumper. Is that normal? Any pictures and pointers would be appreciated, thanx. Also, is there any hardware needed for installation?

Mysticalism

iTrader: (1)

my driver side is a little off on the faux vent comparing to my passenger. Passenger line move right into the faux vent making it look clean, but driver side, it looks like a piece is broken and the line is not parallel to the driver side faux vent

roughx021

how is the fitment on the inside fender well where u screw it in? Does it follow the curve of the bottom of the fender, or does the lip go straight down, with the bottom hanging off the car? Any pics?

da mayor

iTrader: (2)

gave you my 0.02 cents on this one yesterday and im sure it'll be working out fine

roughx021

Here is a visual so there can be a better understanding:

Mysticalism

iTrader: (1)

i'll take some pics and post it here

whiddles

iTrader: (2)

I have the same fitment issues and I am still fighting to get my side skirts replaced becuase they do not even fit at all. I bought the kit back in MARCH and LOU from AMP MOTORSPORTS CANT GET IT FIXED YET. Im really unhappy with the whole kit. I left the lip on the car and put one screw in on each side at the top and left the bottom hanging off like you had said. Other than that the lip fits fine.

roughx021

You think you can post some pics please (front and fender well)

dan222000

I have the same kit on my G37 and all I had to do to attached the entails was to use one screw on each side. I also used some double sided tape. Email me if you need any pictures my kit turned out perfect. Dan222000@aol.com

dan222000

You need to attached 4-6 screws at the bottom in the center of the lip. This evens out the center and holds the lip securely in place.

whiddles

iTrader: (2)

roughx021

Whiddles, Wow, your car looks sexy as hell. Motivation!! Thanx for the pics. I can't tell, did you use screws in the center?

Also feeling your license plate mod, is that the remote one?

whiddles

iTrader: (2)

yeah its a wireless remote. I only used one screw on each side as shown.

dan222000

OK here are some pictures of mine. These are old pictures. I have had the front lip repainted since then. I also raised my car since it was way too low.

ThatsGman

I hope it works out bro!