PolarG vs. PIAA fog lamp replacement
With the help of my Dad, I was finally able to install the piaa 2500k Ion yellow bulbs. They are not very yellow and look almost stock
. All that work for nothing. Another side effect is that they emit a lot of heat. So much heat that my clearbra/overlay installer recommended I remove my tinted headlight overlays, and I had him do just that and replace it with ventureshield.
.
It's wierd because the piaas have the same wattage as the stockies, so I wouldn't think heat is an issue.
For those with the stock foglights, does it emit a lot of heat. I had the overlays on for about a week, and the clear bra installer could already tell it was starting to ripple a little bit in the foglight area.
I hobe it doesnt overheat the healamp housing. I'm thinking the PolarGs would emit even more heat.
. All that work for nothing. Another side effect is that they emit a lot of heat. So much heat that my clearbra/overlay installer recommended I remove my tinted headlight overlays, and I had him do just that and replace it with ventureshield.
.It's wierd because the piaas have the same wattage as the stockies, so I wouldn't think heat is an issue.
For those with the stock foglights, does it emit a lot of heat. I had the overlays on for about a week, and the clear bra installer could already tell it was starting to ripple a little bit in the foglight area.
I hobe it doesnt overheat the healamp housing. I'm thinking the PolarGs would emit even more heat.
Thread
Thread Starter
Forum
Replies
Last Post
LVASJR
G37 Coupe
3
Sep 14, 2015 07:37 AM
SuicidalG37SGuy
Engine, Drivetrain & Forced-Induction
8
Sep 10, 2015 06:01 AM




