license plate leds?
^take out ur license plate frame or license plate, look up and theres two screws each side to the left and right.
unbolt those screws. the piece that holds the lights will be lose try to move it around and u will be able to take it out.
in order to put it back reverse the steps.
unbolt those screws. the piece that holds the lights will be lose try to move it around and u will be able to take it out.
in order to put it back reverse the steps.
Thread Starter
Newbie
Joined: Feb 2008
Posts: 17
Likes: 0
^take out ur license plate frame or license plate, look up and theres two screws each side to the left and right.
unbolt those screws. the piece that holds the lights will be lose try to move it around and u will be able to take it out.
in order to put it back reverse the steps.
unbolt those screws. the piece that holds the lights will be lose try to move it around and u will be able to take it out.
in order to put it back reverse the steps.
Trending Topics
Registered User
Joined: Jul 2007
Posts: 356
Likes: 0
You really don't have to take out the license plate at all, at least I never had to for mine. The light covers have plenty of clearance to take out, should be a 2 minute job really. One thing to be careful about is to make sure the LED's are plugged in the right direction so the contacts line up, if they don't light up when you turn your low's on, then just flip the LED bulb over.
Registered User
Joined: May 2006
Posts: 7
Likes: 0
Super bright Led license plate
http://g35driver.com/forums/showthre...=204206&page=2
http://g35driver.com/forums/showthre...=204206&page=2
This thread has everything you need to know about LED's and the G37 →LIGHTING MODS←
Registered User
Joined: Jan 2008
Posts: 40
Likes: 0
From: Vinings, GA
This thread has everything you need to know about LED's and the G37 →LIGHTING MODS←
Would somone like to let me know if this seems to be a relatively decent deal on the leds for the entire car?
http://cgi.ebay.com/ebaymotors/Gold-...spagenameZWDVW
http://cgi.ebay.com/ebaymotors/Gold-...spagenameZWDVW
Registered User
Joined: Jul 2007
Posts: 6,301
Likes: 1
From: al, eguor notab
^take out ur license plate frame or license plate, look up and theres two screws each side to the left and right.
unbolt those screws. the piece that holds the lights will be lose try to move it around and u will be able to take it out.
in order to put it back reverse the steps.
unbolt those screws. the piece that holds the lights will be lose try to move it around and u will be able to take it out.
in order to put it back reverse the steps.