Diode Dynamics 2008-2015 G37 Coupe Tail as Turn™ Module
09-17-2015, 12:04 PM
#1
Former Sponsor
Thread Starter
iTrader: (11)
Diode Dynamics 2008-2016 G37 Coupe Tail as Turn™ Module! Made in USA!
2008-2016 Infiniti G37 Coupe Tail as Turn™ Module
Diode Dynamics 2008-2016 Infiniti G37 Coupe Tail as Turn™ Module! This is a unique mod that was 100% designed by Diode Dynamics in-house, and is manufactured by us right here in St. Louis, Missouri. Made in USA!
The Tail as Turn™ modules will make your G37 Coupe LED tail light flash as the turn signal as well. With an array of LEDs flashing instead of a boring incandescent bulb, you'll have a unique, modern look!
Using OEM plug-and-play tail light connectors, the base kit is 100% plug-and-play, with no wiring required. You don't even have to remove your tail lights!
The base kit is just $50, which includes a pair of modules with OEM connectors, to convert your LED tail light into the turn signal, with extremely easy installation.
Please note: For ease of installation, our resistor kit will be integrated into each module. This means you will not have to tap any factory wiring to eliminate hyperblinking.
Your order includes:
(2) Tail as Turn Modules with OEM Plug-and-play Connectors
CLICK TO VIEW AND ORDER: 2008-2016 Infiniti G37 Coupe Tail as Turn™ Module
2008-2016 Infiniti G37 Coupe Tail as Turn™ Module
2008-2016 Infiniti G37 Coupe Tail as Turn™ Module
Remember: at Diode Dynamics, we're here if you need us for support and service, with our award-winning service team. We have been in business for over 8 years. We feature an industry-leading 3-year limited warranty. Something wrong? We ship you the new item with a return label. No waiting around!
Questions? Please feel free to post, PM, call, or email contact@diodedynamics.com
*PM us for the free-shipping code* (U.S. forum members only)
We are an American company, located in St. Louis, Missouri. We are open 9-5 Monday-Friday CST. Give us a call!
Nick C.
Diode Dynamics
(314) 205-3033
Last edited by Diode Dynamics; 12-05-2017 at 11:26 AM.
09-25-2015, 09:06 AM
#4
Former Sponsor
Thread Starter
iTrader: (11)
I don't have an exact ETA to provide, but we fully intend to release a plug & play sedan version of this kit.
A new thread will be posted when the sedan kit is available for purchase. We will keep everyone updated on it's progress as well.
Thank you,
Nick C.
10-10-2015, 05:51 PM
#6
Former Sponsor
Thread Starter
iTrader: (11)
We are currently out of stock at the moment. Our production team is working hard to get more of them on shelf.
I apologize for the delay, but they will be available shortly
Thank you,
Nick C.
I apologize for the delay, but they will be available shortly
Thank you,
Nick C.
Trending Topics
10-26-2015, 01:07 PM
#10
Aesthetic improvement aside, I can't say enough about utilizing a mod like this for just the increased safety factor alone when signaling to other drivers that you're turning (and in my case, braking).
Although the manual process of the DIY module install route might be a tall task for some, leading to apprehension about splicing into wires... and they would rather the simplicity of the PnP option for their coupe or sedan (also keeping that true oem look if anyone was to peer below the trunk liner trim)... the thing the DIY module shown in the video with Paul from DD (2nd post) allows one to do easily is to wire up the existing turn signal light (of course, replace it with an LED bulb and that will also require an inline resistor somewhere on the turn circuit to prevent hyper-blink).
The end result is even more visual impact in terms of signaling those behind you when you're braking or using the turn signals (or even hazards).
Here's an example of what's possible.. (excuse the potato like vid quality)
Although the manual process of the DIY module install route might be a tall task for some, leading to apprehension about splicing into wires... and they would rather the simplicity of the PnP option for their coupe or sedan (also keeping that true oem look if anyone was to peer below the trunk liner trim)... the thing the DIY module shown in the video with Paul from DD (2nd post) allows one to do easily is to wire up the existing turn signal light (of course, replace it with an LED bulb and that will also require an inline resistor somewhere on the turn circuit to prevent hyper-blink).
The end result is even more visual impact in terms of signaling those behind you when you're braking or using the turn signals (or even hazards).
Here's an example of what's possible.. (excuse the potato like vid quality)
Last edited by krazyfiend; 10-26-2015 at 01:34 PM.
The following users liked this post:
Diode Dynamics (10-26-2015)
10-29-2015, 09:56 AM
#11
Former Sponsor
Thread Starter
iTrader: (11)
G37 Sedan Owners,
We are still waiting on the factory connectors to arrive for the plug and play Sedan version of the Tail-as-Turn™
An update will be posted when they are available for purchase
Thank you,
Nick C.
We are still waiting on the factory connectors to arrive for the plug and play Sedan version of the Tail-as-Turn™
An update will be posted when they are available for purchase
Thank you,
Nick C.