What's next for Newt?
#46
Administrator
Thread Starter
iTrader: (9)
Are you thinking of trying this yourself, or finding a pro? As a DIY, I suppose everyone has to start somewhere, right? And you've already had some familiarity with wrap. I bet you the material alone would cost anywhere from $500 to $1000. And another $2-3K for a professional job.
I'm pulling these numbers out of my hat, but still... not an insignificant project.
#47
Movin On!
iTrader: (13)
Assuming a quality installation, it probably would look pretty good.
Are you thinking of trying this yourself, or finding a pro? As a DIY, I suppose everyone has to start somewhere, right? And you've already had some familiarity with wrap. I bet you the material alone would cost anywhere from $500 to $1000. And another $2-3K for a professional job.
I'm pulling these numbers out of my hat, but still... not an insignificant project.
Are you thinking of trying this yourself, or finding a pro? As a DIY, I suppose everyone has to start somewhere, right? And you've already had some familiarity with wrap. I bet you the material alone would cost anywhere from $500 to $1000. And another $2-3K for a professional job.
I'm pulling these numbers out of my hat, but still... not an insignificant project.
I'm looking forward to exploring the possibility, so we'll see what turns up.
Glad you like the color, here's the color palette and the one I'm leaning toward is the Night Blue Metallic.
SW 900 Supreme Wrapping Film | Avery Dennison | Graphics
Avery SW900 Supreme Wrapping Vinyl Film Matte Night Blue Metallic
#48
Registered User
iTrader: (1)
Should be pretty easy to do a quality install, I've helped a friend wrap a hood and roof and that was a snap, and have done enough vinyl accessories that have fairly complex shapes. The only area that concerns me would be the front bumper and I could always take that off and have a shop do it if it turns out to be above my pay grade. The great thing about all the current wrap vinyls is the air release technology, really simplifies the install. The bumper w/ the proper heat and adhesion promoters like the 3M 96 Primer should be within my reach, we'll see. Cost for the vinyl, installation tools, & primer would be around $500.
I'm looking forward to exploring the possibility, so we'll see what turns up.
Glad you like the color, here's the color palette and the one I'm leaning toward is the Night Blue Metallic.
SW 900 Supreme Wrapping Film | Avery Dennison | Graphics
Avery SW900 Supreme Wrapping Vinyl Film Matte Night Blue Metallic
I'm looking forward to exploring the possibility, so we'll see what turns up.
Glad you like the color, here's the color palette and the one I'm leaning toward is the Night Blue Metallic.
SW 900 Supreme Wrapping Film | Avery Dennison | Graphics
Avery SW900 Supreme Wrapping Vinyl Film Matte Night Blue Metallic
#49
Administrator
Thread Starter
iTrader: (9)
#53
Administrator
Thread Starter
iTrader: (9)
Wait, Newt's SN is blue now? WTF? When did Brad become a Moderator?
#57
Movin On!
iTrader: (13)
Thought you would of caught that immediately, you're a very observant fellow. You'd better be real careful now if you trash any of my future mods
Seems like just yesterday
No, Mr. Brad will be fine
I had a hunch all this vegging out on the PC would pay off someday, Oh wait, no pay
But I do have a baggie full of Ban-Hammers
No, Mr. Brad will be fine
But I do have a baggie full of Ban-Hammers
#59
Administrator
Thread Starter
iTrader: (9)
The following users liked this post:
Sunny G (12-12-2013)