18x9.5 +22 Offset Questions

Thread Tools
 
Search this Thread
 
Old Jun 16, 2018 | 06:57 PM
  #1  
PhoKingViet's Avatar
PhoKingViet
Thread Starter
Registered User
 
Joined: Jun 2018
Posts: 20
Likes: 13
18x9.5 +22 Offset Questions



Sup Guys! I’m new to the forums and I have a 2007 G35 Sedan. I know that it has the same body as the G37 Sedan, but with the VQ35HR. My question is that I want to run a 18x9.5 +22 square setup and I don’t know if a 245/40/18 would fit the bill. I would like to not run a stretched tire as 245’s is the recommended minimum size for a 9.5 width wheel. I’m also lowered on Tein Street Basis Z with my stock 17s. Will I rub if I run a 245/40/18 tire? If I have to stretch, can I run a 235/40/18? Will I have to roll my fenders in the front to run a 245/40/18?

Last edited by PhoKingViet; Jun 16, 2018 at 06:59 PM. Reason: Adding more questions and detail
Reply
Old Jun 16, 2018 | 07:42 PM
  #2  
blnewt's Avatar
blnewt
Movin On!
iTrader: (13)
 
Joined: Nov 2009
Posts: 24,876
Likes: 4,951
Here's my G running 18x9.5 +38 on 245/45s, your plan would be 2/3" or 16mm further out, I'm at -1.0 camber so you could run more camber to help with that. But to be honest I'd pass on those wheels unless the deal is just crazy good and the wheels are a high quality set that you could easily resell if you aren't happy w/ the setup

https://www.myg37.com/forums/18/2765...ml#post4044919
Reply
Old Jun 16, 2018 | 08:04 PM
  #3  
PhoKingViet's Avatar
PhoKingViet
Thread Starter
Registered User
 
Joined: Jun 2018
Posts: 20
Likes: 13
Originally Posted by blnewt
Here's my G running 18x9.5 +38 on 245/45s, your plan would be 2/3" or 16mm further out, I'm at -1.0 camber so you could run more camber to help with that. But to be honest I'd pass on those wheels unless the deal is just crazy good and the wheels are a high quality set that you could easily resell if you aren't happy w/ the setup

https://www.myg37.com/forums/18/2765...ml#post4044919
Can I run a 235/40/18 tire and lower it a bit more to have little poke? I don’t mind some wheel poke, but I do not want any kind of tire poke. I’ve see some 19x9.5 +22 setups with a 245/40/19 tire and it seems to fit flush. I just don’t know with these 18s if I can pull it off and make it look good. I got these ESR SR11 for $700. They are $830 retail. This guy with the 19s is running a 245/40/19 tire with a 19x9.5 +25 wheel. He’s dropped on Eibach Pro Kit.


Reply
Old Jun 16, 2018 | 10:19 PM
  #4  
blnewt's Avatar
blnewt
Movin On!
iTrader: (13)
 
Joined: Nov 2009
Posts: 24,876
Likes: 4,951
Tires should tuck ok, no prob in back, but the front fender isn't flat-rolled like the rear so you might contact the very inner front fender edge w/ heavy contact, but a bit more camber and you should be ok. Like I said, on my G I'm running light camber at -1.0.


If you've lowered your G and don't have aftermarket camber arms in front then you WILL have more camber than mine
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
RISKY GUY
Private Classifieds
2
Aug 30, 2013 07:01 AM
TheAmazingNik
Wheels & Tires
5
Jan 27, 2012 11:50 PM
j-project
Wheels & Tires
8
Mar 24, 2011 08:13 PM
g35sedan5at
Wheels & Tires
14
Sep 9, 2010 01:49 PM




All times are GMT -4. The time now is 07:29 PM.