So I finally got around to getting my 4 Ray's forged G35 wheels on my G37S coupe for a square setup. I'll clean her up and post pics this weekend.


Question: Will the "mag" lugs I had to switch to for these wheels work ok with the compact spare if needed?


I got 19mm lugs and bought an adapter so I can use the tire tool in the spare kit...just need to know if I need to keep 5 OEM lugs in there too.


thanks!

 

You answered your own question. You switch lugs to accommodate your g35 rays. Your spare came with your g37 which therefore use g37 lugs...

 

The G37 lugs are beveled at the bottom like the standard lugs I am using now, therefore I thought they may work with the spare.


Oh well...if nobody knows for sure I'll just test it out this weekend.

 

left is g35 wheels nuts and right is g37 wheels nuts. theyre not interchangeable. idk wat the fk ur using for wat so use the correct ones pls

 

Yes I am aware that there are different lugs required. That is the reason for the question. Will the G35 lugs work with the G37 spare. Notice the unnecessary beveled edge on the bottom of the G37 lug--I speculated that it could mean that the spare works with the beveled lug of the G35.


I still haven't had a chance to test it but when I do I will post the answer.

 

go look at the spare wheel's lug nut mounting surface. if its flat then u should really be using the correct g37 lug nut.

 

I have confirmed that you must have the stock lugs for the spare. I bagged up 5 of them and placed them in the foam piece that holds the tools in the spare.