Help getting rims!

Old Nov 21, 2014 | 04:28 PM
  #1  
hizzle101's Avatar
hizzle101
Thread Starter
Registered User
iTrader: (1)
 
Joined: Jul 2014
Posts: 137
Likes: 11
From: Los Angeles
Help getting rims!

I know you all have seens these threads a zillion times, but i believe it is my time for some 20's, i am lowered on H&R's with F&R camber kit, i have 1.2* deg in rears, trying to keep camber under 2degrees with the new rims. not looking for anything TOO agressive, but i do want a agressive stance.. Im either looking at
Niche wheels
MRR GF6
Avante garde
or
Vordoven

also i'm not trying to spend a fortune either.
Reply
Old Nov 21, 2014 | 05:47 PM
  #2  
quakerroatmeal's Avatar
quakerroatmeal
Registered Member
iTrader: (3)
 
Joined: Jul 2012
Posts: 1,336
Likes: 97
From: Dallas, TX
I don't understand why people ask this question. Set a budget, look at other peoples setup on the forum who appeals to you the most, check their tire sizes and offset if you like their setup, check for tire reviews, order both wheels and tires. Unless you're ordering wheels for me than I'd be more than happy to help you pick them out.
Reply
Old Nov 21, 2014 | 05:53 PM
  #3  
Solidus's Avatar
Solidus
Registered Member
 
Joined: Jan 2014
Posts: 266
Likes: 39
Originally Posted by hizzle101
I know you all have seens these threads a zillion times, but i believe it is my time for some 20's, i am lowered on H&R's with F&R camber kit, i have 1.2* deg in rears, trying to keep camber under 2degrees with the new rims. not looking for anything TOO agressive, but i do want a agressive stance.. Im either looking at
Niche wheels
MRR GF6
Avante garde
or
Vordoven

also i'm not trying to spend a fortune either.

There's a thread here specifically made for you to ask questions on these issues. Just do a search it should be near the top because Blnewt is always helping someone.
Reply
Old Nov 21, 2014 | 05:56 PM
  #4  
hizzle101's Avatar
hizzle101
Thread Starter
Registered User
iTrader: (1)
 
Joined: Jul 2014
Posts: 137
Likes: 11
From: Los Angeles
ok yeah thank you, can anyone shed some light if these brands are good quality?
Reply
Old Nov 21, 2014 | 06:13 PM
  #5  
blnewt's Avatar
blnewt
Movin On!
iTrader: (13)
 
Joined: Nov 2009
Posts: 24,876
Likes: 4,950
Originally Posted by hizzle101
ok yeah thank you, can anyone shed some light if these brands are good quality?
The Vordovens are knock offs of high quality wheels, I'd question the quality of knock offs.
Niche & MRR are low pressure cast wheels which are cheaper, heavier, and due to more support needed for strength can be tougher to clear big brake calipers w/ the smaller wheel setups.
Avante Garde has both cast and forged sets, so something for everyone.
The lower three should be fine on a budget and the AG forged would be a big jump up in overall quality and price.

Check this folder for everything wheel related and if you have something more specific post a thread over here~
Wheels & Tires - MyG37
Reply
Old Nov 21, 2014 | 06:43 PM
  #6  
Solidus's Avatar
Solidus
Registered Member
 
Joined: Jan 2014
Posts: 266
Likes: 39
Originally Posted by blnewt
The Vordovens are knock offs of high quality wheels, I'd question the quality of knock offs.
Niche & MRR are low pressure cast wheels which are cheaper, heavier, and due to more support needed for strength can be tougher to clear big brake calipers w/ the smaller wheel setups.
Avante Garde has both cast and forged sets, so something for everyone.
The lower three should be fine on a budget and the AG forged would be a big jump up in overall quality and price.

Check this folder for everything wheel related and if you have something more specific post a thread over here~
Wheels & Tires - MyG37

And this is what Newt does!!!! Well done sir.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
stm37s
The M - Spot
14
Oct 23, 2015 01:56 AM
stm37s
The M - Spot
0
Oct 1, 2015 06:53 AM
Soccer4555
Wheels & Tires
3
Sep 30, 2015 05:31 PM
mikeace
G37 Sedan
9
Sep 30, 2015 01:39 PM


Thread Tools
Search this Thread

All times are GMT -4. The time now is 12:37 AM.