Anyone know the stock stud lengths? I'm going to be throwing on 5mm spacers and for peace of mind of not having a wheel fall off..I want to order some studs that are slightly longer than stock... I can't seem to did the length of the stock studs though..


Any Advise please, thanks!

 

What is the G37's OEM wheel stud length?

The "Search button" is your friend

 

The answer wasn't in that thread either lol. That just had the thread/pitch

 

Why not get the HR spacers that bolt to the hub and have their own studs for the wheel? I ran those 20MM on my coupe no issues are all.

2008-2010 Infiniti G37 Wheel Spacers 5X114.3 12X1.25 25MM 66.1MM

 

Anytime you are reducing the length of the stud, you'll want to make sure you compensate for that with new longer studs.

 

Index of /FSM/G37

 

Aur11, if i dont know the stock lenght, hiw do i compensate the 5mm of a spacer.

Gio37, that isnt a length as previously mentioned. Ive searched and not one thread has an answer.
Looks like my choices are 50mm or 60mm or a custom length. Dunno how thise compare to stock..

Anmvq, 5mm dont come with studs built in, plus id have to cut my stock studs i think, which is a nono. I need to prder the spacers custom so i can get both wheel and hubcentric anyway.

Guess ill look theough the FSM for some luck

 

Oh didn't know,
But looks like they come with new ones.

H&R Wheel Spacers For Infiniti G37 Sedan 2009-up 5mm (1065662)

 

Those aren't wheel centric..new wheels have a 73mm centerbore, and it doesn't say how long those studs are -.-

Oh, the words "stud" and "lug" don't show up in the FSM.

 

I was able to have 5mm on my old wheels without a problem but on my new wheels I cant.

The rule is make sure it has 6 full (360) turns.

 

I've had no modifications and I'm about 5'9".

 

^ studs can never be too long right lol.

So did you buy longer studs? What size if you did? In pretty sure a 5mm spacer is gonna make me lose 2-3 turns, and I highly doubt I'm getting 8 as it is..

 

I just ran out to the garage and grabbed one of my stock wheel studs...

If I measured it correctly, it is 33mm (Measured from end of knurl to end of threads)



I have 50mm extended studs for my 10mm spacers and they work fine. Not sure if they'd be too long for 5mm spacers though.

If I were you, I'd call a couple performance shops and see what size they recommend.

 

How about this





Link

 

Are you running open ended lug nuts or closed?