AG just announced some new info on their new low pressure cast M540s!

Arriving First in Early December:

20x9/10/10.5"
M540 - Silver Machined & Bespoke Custom finishes

This is a DIFFERENT finish than their Satin Machined Silver, this is a GLOSS finish, and from what I've seen, I actually like it a lot better than the Satin.
The machined faces are more reflective than the old finish, and the wildows/barrel is a nice metallic silver.


Arriving late December:

20x9/10/10.5"
M540 - Brushed Grigio



Arriving ~Feb 2015 M540 19x8.5 19x9.5 Fitments!

 

Vossen Black Friday Sale!



$200 off CVT, VFS-1, and VFS-2




$300 off the CV5, CV7, CV4



FREE: Vossen T Shirt, License Plate Frame, Lanyard with every Black Friday Order

This is a limited time offer that is only available until Dec 1st!


If you have been eyeing Vossen wheels all year, now is the time to take advantage of the best pricing of the year!
Contact me at Jason@Getyourwheels.com or 562-219-2525, and mention you are from the forums!

 

This bagged A4 came for a quick swap from... 19x9.5 Bespoke 3 Brushed Candy Red M580s:



To 20x10 M590s in Bespoke 3 Brushed Champagne!




Loving the color combo, I've only previously seen Brushed Champagne on white... but I think I like it even better on black!
Didnt think I could like anything more than the Brushed Candy Red on the S4 with the red Stoptechs but I stand corrected!

 

Heres a set of 17" CE28N in Bronze going out


These weigh just 14 lbs in 17x8.5!

 

Set of 18x8.5" M310s finished in Bespoke 2 Matte Candy Red two stage powdercoat

 

What offsets & tire is he running for the 19x11?

 

We got him +34, but I believe he may be running spacers for a more aggressive fitment.
Let me know if you're interested in a similar set!

 

Here is Super Deep Concave F14 in a two stage Blue Sapphire upgraded powdercoat finish!

 

1. But even at 11 +34 doesn't that require a good amount of camber ?
2. What's the least aggressive set offset you guys offer for the super deep fitment?

 

The +34 is an aggressive fit on the G37, but we measured it out exactly and its the highest offset possible without hitting the brakes.
A bit of camber and a mild stretch is needed, but not an excessive amount.

The we spec'd out his set to fit aggressively with minimal tire stretch. I think he pulled it off well!

 

A few sets finished up and ready to go out!
20" M590s in Bespoke 1 Gloss Gunmetal for a Tesla
19x9 19x10 CF5Vs in Gloss Gunmetal for a 435
20x9 20x10.5 Verde Axis V99s refinished in a custom Matte/Gloss Black finish for a 435


Verde Axis close up


Forgestar CF5V with the meaty Michelin PSS tires mounted up!

 

Here is a set of M590s finished in the new Bespoke 3 Brushed Tangerine finish!

What color car would you run these on? I'd love to see them on a black car!

 

Heres a set of my favorite Enkeis to date...
The RS05RR which is special order race wheel from Japan only
Available in Matte Gunmetal and Silver!




They offer DEEP concavity in the right offsets

 

We had two different Vossen CV7 finishes come through the warehouse today, so I though I'd snap some comparison shots.

Finish shown on the left is their Machined Graphite, and the finish on the right is the Matte Graphite



This is a 20x9 20x10.5 Set going out to our customers 2015 Mustang GT!
Installed photos coming soon!

 

Heres a teaser photo released by AG of their new M600 series Rotary Forged directional wheel!



We've heard their 20x10 fitment weighs only about 20 lbs!
These will feature semi-concave front and deep concave rear profiles!

These will be available January 2015 in 20x9, 20x10, 20x10.5, and 20x11
Available with their Bespoke Program only, so all sets include custom finishing and custom offsets!


Now accepting Preorders!


Here are some photos from the test fit!



Note: Wheel pictured is raw and unfinished