Hey guys,

Before anybody tells me to search, I've been searching for the last 3 hours and never got a conclusive answer on this. I have a 2012 AWD sedan. I want to put 20x10.5" Stance SC-6ix wheels all around. Not only would it look sick because the wheels are concave, but I wouldn't have any issues with overall diameter since my car is AWD. I'm on Eibachs now but I plan to get BC coilovers if I need to.


My question:

Will 20x10.5" +27 fit all around without modication? They also offer 20x10" +40 if it helps. The concavity is the same with either so I just need to know which will fit best before I pull the trigger.

Here is the link to the site with all of their sizes/offsets.
SC-6ix Machine Matte Silver Wheel - Stance Wheels


Thanks

 

Hello @themajesticking
i am running 20 x 10.5 +38 all around and lowered on eiback pro kit.
i went ahead and had my front and rear fenders pulled and rolled.
i am running 275/30/20 all around as well.
you probably wont have to pull your fenders if you are not running that wide of a tire.

 

<img src="https://lh5.googleusercontent.com/-D8QqHlpXUlI/USdxvUgyRgI/AAAAAAAAaZ4/8fcXe-pHRTk/s1476/DSC_3136.jpg">
<img src="https://lh5.googleusercontent.com/-rOi0izS3Rgo/USdxcPSkxyI/AAAAAAAAaZg/MPqdrhuu4Xw/s1185/DSC_3127.jpg">
<img src="https://lh4.googleusercontent.com/-cBVN2D4MjL0/USdxRhIJeII/AAAAAAAAaZQ/eCkgyXdacq0/s1185/DSC_3117.jpg">
<img src="https://lh6.googleusercontent.com/-thR-XK-ZKTg/USdxHEPOVFI/AAAAAAAAaZA/1BXa1LuoWUA/s1476/DSC_3113+%281%29.jpg">
<img src="https://lh4.googleusercontent.com/-iTfmYHV_pok/USdxYJWBxBI/AAAAAAAAaZY/MKsR1Wqw7Jg/s1477/DSC_3126.jpg">

 

Thanks for the info. Looks nice. Looks like you were trying to avoid negative camber. I planned on running the 20x10 +35 since it shouldn't require much to fit. I was going to run 265s all around and leave the natural negative camber that comes with lowering. Do you think I will need to modify the fenders with that setup?

 

if you are fine with the negative camber, then you wont need to worry about the fenders... i have to roll and pull because i didnt want the negative camber.