Official Vossen G37 Wheel Thread! Post Up!
thanx for the input.. what are the specs on yours Pcasey? That's basically the look I'm going for, especially if I get the vossen cv3's. what did you need to do to get your car to sit like that.. can pm me if necessary, but I'm sure others would like to know too. I'm probly looking at a 1 to 1.5 inch drop all the way around, so not too low. Will probly get BC coilovers first, then wheels etc. Thanx!
Thread Starter
Registered User
iTrader: (16)
Joined: Jul 2008
Posts: 5,967
Likes: 15
From: Miami,Florida
LOL..... Been a long time since I started this whole thread and mounted my first set of Vossens Wheels!!! Lets just keep this going >>>>>>>> MORE to COME
This just keeps getting better and better! CV3 are by far the BEST OF THE BEST !!! Especially the Beautiful new Matte Graphite Finish....







This just keeps getting better and better! CV3 are by far the BEST OF THE BEST !!! Especially the Beautiful new Matte Graphite Finish....






Ok, so after numerous questions and lots of research, here's what I'm looking at..
Either Vossen CV3's Matte Graphite or VVS084's Black Machined/Stainless Lip
Fronts: 20" x 9", offset: 32mm, bolts: 5x4.5/114.3, tires: 245/35/20 (Hankook Ventus V12 Evo's)
Rears: 20" x 10.5", offset: 42 (084) 45 (cv3), bolts: 5x4.5/114.3, tires: 275/30/20 (Hankook Ventus V12 Evo's)
That sound about right to the experts? It's a less aggressive setup, I don't want them sticking out, or to rub, or stretched tires. I don't race my car, so I don't want to sacrifice comfort and get a rougher ride. I've been
to make sure I'm getting exactly what I'm looking for. Any opinions and or suggestions welcome! Thanx
Either Vossen CV3's Matte Graphite or VVS084's Black Machined/Stainless Lip
Fronts: 20" x 9", offset: 32mm, bolts: 5x4.5/114.3, tires: 245/35/20 (Hankook Ventus V12 Evo's)
Rears: 20" x 10.5", offset: 42 (084) 45 (cv3), bolts: 5x4.5/114.3, tires: 275/30/20 (Hankook Ventus V12 Evo's)
That sound about right to the experts? It's a less aggressive setup, I don't want them sticking out, or to rub, or stretched tires. I don't race my car, so I don't want to sacrifice comfort and get a rougher ride. I've been
to make sure I'm getting exactly what I'm looking for. Any opinions and or suggestions welcome! Thanx
Thread Starter
Registered User
iTrader: (16)
Joined: Jul 2008
Posts: 5,967
Likes: 15
From: Miami,Florida
Another Hot OB Vossen Car ..... Features the Aero sides as well
Specs are Vossen Matte Black CV1
Offsets : 32/42 but 10MM spacers added F+R Sittin pretty at 22/32
Tires: 245/30 275/30 Hankook V12s
Suspension : Tanabe Coils W SPC F+R Camber Kits....




Specs are Vossen Matte Black CV1
Offsets : 32/42 but 10MM spacers added F+R Sittin pretty at 22/32
Tires: 245/30 275/30 Hankook V12s
Suspension : Tanabe Coils W SPC F+R Camber Kits....



Last edited by VossenG37S; Jun 14, 2011 at 10:09 AM.
WOW!! One of my favs!! Sides look perfect






