Official Vossen G37 Wheel Thread! Post Up!
#2356
Registered User
iTrader: (2)
HUGE thanks to TwoThree for the headlight work, and JDMProducer for help with the grill, couldn't have done this without you guys....without further delay, onto the pictures:
A quick basic progress picture of the changes to the car, i made a better one (it was harder to see all the changes ive done) so i'll be putting up a build thread in the near future:
and in the spirit of TBT, top is day i brought it home (got it tinted on the way home), bottom is yesterday after finished installed the new parts:
A quick basic progress picture of the changes to the car, i made a better one (it was harder to see all the changes ive done) so i'll be putting up a build thread in the near future:
and in the spirit of TBT, top is day i brought it home (got it tinted on the way home), bottom is yesterday after finished installed the new parts:
#2357
Administrator
iTrader: (9)
While waiting for Swift Springs to arrive and (gently) drop the car, here it is all cleaned up for a car meet next week.
VOSSEN CVT, 19" staggered, with Michelin PSS.
19 x 8.5 +32, 245/40ZR19
19 x 10 +42, 275/35ZR19
The rears poke 1/2", so I'm hoping them come in with a drop. The fronts are flush, so after they pull in I'll put 3mm spacers on the front. Which is good, because I only have 3mm clearance with the BBK as it is.
VOSSEN CVT, 19" staggered, with Michelin PSS.
19 x 8.5 +32, 245/40ZR19
19 x 10 +42, 275/35ZR19
The rears poke 1/2", so I'm hoping them come in with a drop. The fronts are flush, so after they pull in I'll put 3mm spacers on the front. Which is good, because I only have 3mm clearance with the BBK as it is.
Last edited by Rochester; 04-18-2014 at 04:42 PM.
The following users liked this post:
destro6MTsedan (04-21-2014)
#2359
Registered User
I run V12s with this setup and have no issues. Check out my pics in the last page back
20x9 +32 255/35/30
20x10.5 +45 285/30/20
20x9 +32 255/35/30
20x10.5 +45 285/30/20
Question for everyone. Has anyone successfully been able to run Hankook v12 275/35 or 30/20 tires in the back for the CV3 wheels without rubbing?
I currently have 255/30 in the back and the wheels are taking a beating from the rocks all around the lips. I want to get the wheels powdercoated and avoid the issue of chipping by putting a thicker tire.
I currently have 255/30 in the back and the wheels are taking a beating from the rocks all around the lips. I want to get the wheels powdercoated and avoid the issue of chipping by putting a thicker tire.
#2360
Beautiful car! In my opinion, the CV1 looked better on your car, with the 2011 sport bumper it would look sharper. You should get the IPL sides with that bumper, to give it that extra oomphffff That's that I'm rocking, looks great.
HUGE thanks to TwoThree for the headlight work, and JDMProducer for help with the grill, couldn't have done this without you guys....without further delay, onto the pictures:
A quick basic progress picture of the changes to the car, i made a better one (it was harder to see all the changes ive done) so i'll be putting up a build thread in the near future:
and in the spirit of TBT, top is day i brought it home (got it tinted on the way home), bottom is yesterday after finished installed the new parts:
A quick basic progress picture of the changes to the car, i made a better one (it was harder to see all the changes ive done) so i'll be putting up a build thread in the near future:
and in the spirit of TBT, top is day i brought it home (got it tinted on the way home), bottom is yesterday after finished installed the new parts:
#2361
Registered User
Time to share my new set up. These are the new Vossen VF Series VFS2 in satin bronze. These wheels are are built using Flow Formed technology. Here are the pics:
Rolling
Now time to get the chrome trim wrapped in black. Let me know what you guys think.
Rolling
Now time to get the chrome trim wrapped in black. Let me know what you guys think.
#2362
Administrator
iTrader: (9)
These 19" CVT's look much better now when dropped on Swift Springs. It pulled the 10" rears in so they don't poke so embarrassingly like they did just a few weeks ago, as posted above. It's a nice, even drop, and still totally drive-able like a DD should be.
The following users liked this post:
destro6MTsedan (05-06-2014)
#2363
Registered User
iTrader: (2)
thanks man!! the first set was the cv3's not 1's, and trust me, i still miss my 3's ( diego). definitely been on the fence about putting the ipl sides with my bumper, any way you could message me some photos of how it looks with the 2011+ sport bumper so i can get an idea. thanks man!
#2365
Registered User
#2367
Premier Member
iTrader: (13)
I think I will go with the Matte Graphite now I have tires for the front Good Year 245-40-19 so I will get the 19X8.5 and my question is what specs do I need for the 19X10? would 275-35-19 be worry free?