Volk GT-Cs w/24mm offset on a G37?
Was wondering if the rims on my 35 will fit a 37 that isn't dropped?
Fronts are 19x8.5 and rears are 19x9.5. Offset is 27 in the front and 24 in the rear.
Fronts are 19x8.5 and rears are 19x9.5. Offset is 27 in the front and 24 in the rear.
Last edited by Buddy Revell; Mar 21, 2008 at 09:26 PM.
Well, if you have sport wheels, your looking at the front sticking out 19mm further (.75").
In the rear, You'll stick out and extra 32.25mm (1.27")
I would think this would fit fine, but I'm no expert.
In the rear, You'll stick out and extra 32.25mm (1.27")
I would think this would fit fine, but I'm no expert.
10.5/2=5.25-1.34(34mm)=3.91"
so almost exactly. Again, I'm no expert but I believe the drop has something to do with fitment too, i.e. if the drop causes a little negative camber it would actually help the fit. I have seen pics of DKangs car b/c its one of the cars that made me choose the GTCs
and I believe his rear neg camber helps those huge 10.5s fit with no rubbing...?
9.5/2=4.75-.95(24mm)=3.8"
10.5/2=5.25-1.34(34mm)=3.91"
so almost exactly. Again, I'm no expert but I believe the drop has something to do with fitment too, i.e. if the drop causes a little negative camber it would actually help the fit. I have seen pics of DKangs car b/c its one of the cars that made me choose the GTCs
and I believe his rear neg camber helps those huge 10.5s fit with no rubbing...?
10.5/2=5.25-1.34(34mm)=3.91"
so almost exactly. Again, I'm no expert but I believe the drop has something to do with fitment too, i.e. if the drop causes a little negative camber it would actually help the fit. I have seen pics of DKangs car b/c its one of the cars that made me choose the GTCs
and I believe his rear neg camber helps those huge 10.5s fit with no rubbing...?Trending Topics
The numbers I came up with were how far the wheel would stick out from the hub. Offset is how far from the center of the rim the mounting surface is. If you had zero offset on an 8 inch wheel, the mounting surface would be right in the middle and the wheel would stick out 4" from the hub. If your offset was 1", the wheel would stick out 3". Make sense?



