Mark this thread as Unsold
FS New 4.08 ring & pinion set + differential
#1
New 4.08 ring & pinion set + differential
Category: Drivetrain
Price: $850
Private or Vendor Listing: Private Listing
Part fits: 2010+ G37 Coupe, 2010+ G37 Sedan, 2008-2009 G37 Coupe, 2008-2009 G37 Sedan, Other Model G's
Location (State/Prov): NJ
Item Condition: Brand New
Last edited by AcidWARP; 05-31-2014 at 06:48 PM.
#3
Registered User
iTrader: (2)
Join Date: May 2013
Location: Houston Tx
Posts: 48
Likes: 0
Received 0 Likes
on
0 Posts
Me too! I'm in Dallas but going back to Jersey (where I am from) for the week 4th of july. Beach time lol. What size wheels? I got 2-245/45/18 firestone firehawk Indy 500 with low miles. Or I got 2 brand new 245/40/18 bf Goodrich g force II drag radials. Still with stickers on them. Also have kinetix control arms on my car now I may take them off for these. PM if anything catches your interest.
#4
Me too! I'm in Dallas but going back to Jersey (where I am from) for the week 4th of july. Beach time lol. What size wheels? I got 2-245/45/18 firestone firehawk Indy 500 with low miles. Or I got 2 brand new 245/40/18 bf Goodrich g force II drag radials. Still with stickers on them. Also have kinetix control arms on my car now I may take them off for these. PM if anything catches your interest.
#5
Registered User
iTrader: (2)
Join Date: May 2013
Location: Houston Tx
Posts: 48
Likes: 0
Received 0 Likes
on
0 Posts
Would you do just the gears and bearings without the diff housing? I already upgraded my 08 journey with the Manuel version Vlsd since my car orginaly came with the lsd. If so what would be your price? And if I throw in the front control arms what would you be thinking?
#6
Would you do just the gears and bearings without the diff housing? I already upgraded my 08 journey with the Manuel version Vlsd since my car orginaly came with the lsd. If so what would be your price? And if I throw in the front control arms what would you be thinking?
Trending Topics
#11
Registered User
iTrader: (2)
Join Date: May 2013
Location: Houston Tx
Posts: 48
Likes: 0
Received 0 Likes
on
0 Posts
Sorry I don't understand.. why would the bearings have to be pressed off? Also probably like 200 I bought them a few months back from dimsler. Here's the post but he took the pic down. It has the details about the arms. I paid like 225 or 215 for them. I wouldn't mind paying extra for the differential I would just want the gears already installed. So I could just take my diff out and sell it. Also did you say that differential was an open diff. I thought the gears only fit in the Manuel version housing?
https://www.myg37.com/forums/private...orlds-ebc.html
https://www.myg37.com/forums/private...orlds-ebc.html
#12
Sorry I don't understand.. why would the bearings have to be pressed off? Also probably like 200 I bought them a few months back from dimsler. Here's the post but he took the pic down. It has the details about the arms. I paid like 225 or 215 for them. I wouldn't mind paying extra for the differential I would just want the gears already installed. So I could just take my diff out and sell it. Also did you say that differential was an open diff. I thought the gears only fit in the Manuel version housing?
https://www.myg37.com/forums/private...orlds-ebc.html
https://www.myg37.com/forums/private...orlds-ebc.html
#13
Registered User
iTrader: (2)
Join Date: May 2013
Location: Houston Tx
Posts: 48
Likes: 0
Received 0 Likes
on
0 Posts
Would you sell me just ring and pinion with the two bearings pressed on...that is If you don't want to have them pressed off. I also had a thought would you have any need for 3.69's that I'll be taking out. Plus I would be buying an install kit at this point so I could send the 2 new bearings. If any of this is an option what cash would you want straight up or untop of the camber arms?
#14
Would you sell me just ring and pinion with the two bearings pressed on...that is If you don't want to have them pressed off. I also had a thought would you have any need for 3.69's that I'll be taking out. Plus I would be buying an install kit at this point so I could send the 2 new bearings. If any of this is an option what cash would you want straight up or untop of the camber arms?
#15
Registered User
iTrader: (2)
Join Date: May 2013
Location: Houston Tx
Posts: 48
Likes: 0
Received 0 Likes
on
0 Posts
Lol sorry no I was saying without diff and diff bearings. Seeing if you would want my gears to make a package with that diff. To be honest I really want to get a 1.5 quaife here soon after.