Category: Steering & Suspension
Price: $1500
Private or Vendor Listing: Private Listing
Part fits: 2010+ G37 Coupe, 2010+ G37 Sedan, 2008-2009 G37 Coupe, 2008-2009 G37 Sedan
Location (State/Prov): TX
Item Condition: Brand New

Up for sale is a set of Bilstein PSS10 B16 coilovers I bought for my G37. I just barely installed them and the minimum drop up front was a bit lower than I wanted to go. Very few miles on them, drove to get an alignment then back home, they are as good as new.

Selling for $1500 obo, $100 off of new price, as well as no tax, shipping, wait time.

Prefer local to North Texas, or I will ship at buyer's expense.

 

How was the ride with these? Also do you know what the max drop is?

 

The ride was excellent. I had Bilstiens on my G35 coupe. Great coilovers to improve performance yet still maintain a comfortable street ride. If you want a dedicated track setup, you should probably go with something else, but for a daily driven car with visits to your local track for High Performance Driving Events, these do great.

Max drop is 2 inches on a 370z, which translates to more on the G37, but not sure exactly how much more. I you dig in the coilover stickies I believe it is mentioned the difference in a drop a coilover will give from the 370z to the G.

 

Hm. I am on stance coilovers now but I don't really like the ride, it's too bouncy. I am dropped 3.5" all around.

 

Maybe try reducing the drop? Are they adjustable? If so, try increasing your rebound a bit and see if that helps.

I will say though, Bilsteins are known for performance, where as Stance coilovers are more known for.. stance Porches and Mitsu Evo's use Bilstein suspension components as OEM.

 

Haha I want to lower it more.

 

Lol, I see. I don't think these are the right coilovers for you then, to be honest.

 

True. Thanks for the info anyway. Not sure how these guys get so low. As it sits it doesn't rub or scrap. I just hate the ride quality

 

Bags.

 

I've seen lots of static guys real low.

 

Aaaalrighty, back on topic. Someone buy these coilovers

 

Do you have any pictures at its highest height?

 

I have the fronts at the highest height, but the rears are not at the highest setting, I balanced them with the fronts.

 

These reuse OEM top hats correct?

Anyway, I saw your other post about adding spacers to raise the front height a little. If you are in Dallas area, you can give Vorshlag a call, they specialize in suspensions and chassis, and heavy custom fabrication, I am very sure they can take measurement and fabricate this for you.

If you are in Fort Worth, I would try Texas Track Works.

 

​​​​​​Correct. Thanks for the suggestions! Vorshlag wouldn't even install them and corner balance for me since I didn't buy the coilovers from them. Doubt they'll make the spacers. I'll try TTW, I've used them before and they were great, just a long drive away.