Snaoum

iTrader: (1)

Category: Accessories
Price: $2147483647
Private or Vendor Listing: Private Listing
Part fits: 2010+ G37 Sedan, 2008-2009 G37 Sedan
Location (State/Prov): AL
Item Condition: Used

Looking for muffler delete pipes with tips and flanges to bolt directly to the car without cutting or any modifications.

Snaoum

iTrader: (1)

TTT for Monday

Snaoum

iTrader: (1)

TTT, anyone?

Entcee

iTrader: (3)

The best thing to do would probably be to buy some tips that you like, then go to a muffler shop and have them make some pipes that will bolt on to the car and have them weld the tips on those pipes.

Snaoum

iTrader: (1)

I don't want the stop to cut up my stock muffler flanges. Would flanges be something they would have or I would need to bring that?

Entcee

iTrader: (3)

They should have flanges unless they are a special type.

I am about to do the exact same thing in the next couple weeks.

Snaoum

iTrader: (1)

Just before the mufflers its like a quick disconnect type flange, not bolt on. There is a clamp and I want it done that way so I can swap in mufflers easily anytime.

Entcee

iTrader: (3)

Pretty sure it is just 2 pipes, one inside the other with a clamp. Muffler shop should be able to do that.

I am going to remove the mufflers myself, then take it to a shop for them to add pipes and tips. I also want these bolted on so they can be removed to put my stock mufflers on at a later time.

Snaoum

iTrader: (1)

You are correct, but it is a weird clamp. One side I think has a lip on the pipe with a ring gasket. Let me know if yours is the same. Maybe have your shop make 2 sets and I'll pay you for it plus shipping

Entcee

iTrader: (3)

Might have to reuse the actual clamp, not sure... I will be finding out more info (what will be involved, pricing, etc..) the week of the 19th.

I will get in touch with you once I get the details and might be able to do 2 to ship one set to you. I have my tips already (well ordered anyway). You would have to pick out some tips and send them to me or hope the muffler shop has a set of tips that you would like.

Snaoum

iTrader: (1)

Let me know. I would be OK with no tips if it came down to it. What tips did you buy?

Entcee

iTrader: (3)

I got black 4" round tips with a 10 degree slant cut.

Snaoum

iTrader: (1)

Those are nice looking tips.

Wangstas863

iTrader: (1)

Buy mine . Custom Optimus performance axle back welded to Midpipes. Burnt tips , stainless steel mandrel bent . Close to being straight pipe , but has a resonator to keep 0 rasp.

Wangstas863

iTrader: (1)