Mark this thread as Unsold
FS Work CR2P wheels and tires
The following users liked this post:
kevoevo (04-04-2016)
The following users liked this post:
kevoevo (04-04-2016)
#6
#7
Registered Member
iTrader: (1)
you'd get more in depth answers in the wheels/suspension threads but 11 +15 in the rear will work with a little bit of negative camber and some stretched tires (like 245/35 or 255/35 - ballpark) without having to pull or anything..you'd just need to trim the liner and the bumper tab a bit
Trending Topics
#8
you'd get more in depth answers in the wheels/suspension threads but 11 +15 in the rear will work with a little bit of negative camber and some stretched tires (like 245/35 or 255/35 - ballpark) without having to pull or anything..you'd just need to trim the liner and the bumper tab a bit
#10
These do NOT fit my fender flares. That's why i am selling them. The rears will require some work to fit a G. For anyone interested in perhaps running this set up on a Z, they fit perfectly without modification or excessive camber. I can forward a picture of these exact wheels on a Z if anyone is interested.
#15
Premier Member
iTrader: (40)
I've looked through that thread, unfortunately there are only very few who run aggressive, fender to lip or tucked static/bagged setups who are determined to be kissing the ground. So tires sizes will be very different when determining how low you go and etc. Although those are the tire sizes im kind of shooting for at this moment.
The following users liked this post:
kevoevo (04-18-2016)